134 Photos
2015 Cat 627K Motor Scraper
Located
Morgantown, PA
Morgantown, PA
Usage
8,555 hrs
8,555 hrs
Serial number
CAT0627KJWTC00180
CAT0627KJWTC00180
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15385807
In yard
No
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, Tier 4, 2014 US EPA Label, Requires Diesel Exhaust Fluid, Push-Pull, Cushion Hitch, Fast Fuel System, 33.25R29 Tires
Notes
***Hours and wear will increase as the unit is still in use until sold***
General Appearance
Serial Number / VIN
CAT0627KJWTC00180
Hour Meter / Odometer
8555 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Control Station
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
2014 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.
Rear Engine
Emission Certification Label
US EPA certification label
Blow by @ idle (subjective visual observation)
Minor
Starter
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Limited Function Check (Engine)
The engine started and ran.
Drivetrain
Transmission Type
Powershift
Transmission
Operational
Front Axle Assembly
Dripping leak
Final Drives
Dripping Leak, Right front final drive is leaking from the rear
Limited Function Check - Scraper
The drivetrain was operational without a load.
Rear Transmission
Operational
Rear Axle Assembly
Final Drives - Rear
Limited Function Check
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Steering Cylinders
Bowl Lift Cylinders
Apron Lift Cylinders
Ejector Cylinder
Limited Function Check
The hydraulic system was operational.
Chassis
Belly Pans
Hitch Condition
Hitch Pin Condition
Draft Arm Condition
Draft Arm Trunnions
Heavy movement
Bowl Condition
Floor Rollers / Guides
Ejector Face Condition
Apron Condition
Heavy wear, Heavy wear on lower portion of the apron
Apron Trunnions
Heavy movement
Push Block
Cutting Edges
Reversible - turned
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Master Cylinder
Brake Control
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Oil Sample Analysis
Oil Sample Analysis
| engine-1 | engine-2 | transmission-1 | transmission-2 | |
|---|---|---|---|---|
| Aluminum | 2.5 PPM | 1.85 PPM | 0.93 PPM | 2.36 PPM |
| Chromium | 0.7 PPM | 0.43 PPM | 0 PPM | 0 PPM |
| Copper | 3.87 PPM | 2.75 PPM | 7.55 PPM | 17.83 PPM |
| date of analysis | Jul 22, 2026 | Jul 22, 2026 | Jul 22, 2026 | Jul 22, 2026 |
| Iron | 29.26 PPM | 8.99 PPM | 4.15 PPM | 4.12 PPM |
| Lead | 1.87 PPM | 2.2 PPM | 0.62 PPM | 8.85 PPM |
| Nickel | 0.46 PPM | 0.21 PPM | 0.04 PPM | 0.97 PPM |
| Silicon | 1.14 PPM | 0 PPM | 2.78 PPM | 22.02 PPM |
| Silver | 0 PPM | 0 PPM | 0 PPM | 0 PPM |
| Tin | 2.44 PPM | 1.77 PPM | 0.77 PPM | 1.23 PPM |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.