93 Photos
1970 Cat 631C Motor Scraper
Located
Cumming, GA
Cumming, GA
Serial number
67M3491
67M3491
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14170881
In yard
No
Features
Open Operator Station, 33.25-35 Tires
General Appearance
Serial Number / VIN
67M3491
Hour Meter / Odometer
Meter reading could not be obtained-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Not operational
Safety
Seat Belts
Inoperable
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Inoperable
Gauges
Tachometer gauges are inoperable
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
No US EPA Label Present
Emission Label
No label present
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission Type
8 Speed
Transmission
Operational
Front Axle Assembly
Final Drives
Limited Function Check - Scraper
The drivetrain was operational without a load.
Rear Axle Assembly
Limited Function Check
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hydraulic tank is over filled.
Hoses
Steering Cylinders
Bowl Lift Cylinders
Apron Lift Cylinders
Ejector Cylinder
Dripping leak
Limited Function Check
The hydraulic system was operational.
Chassis
Belly Pans
Hitch Condition
Hitch Pin Condition
Draft Arm Condition
Draft Arm Trunnions
Bowl Condition
Floor Rollers / Guides
Ejector Face Condition
Worn with patches welded on the face.
Apron Condition
Heavy wear
Apron Trunnions
Trunnion balls need to be replaced.
Push Block
Cutting Edges
Heavy wear, Reversible - turned
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned with wear in the pivot points.
Brake Control
Not operational
Brake Lines/Hoses
Leaking.
Park Brake
Inoperable
Limited Function Check - Brakes
The service brakes are inoperable.
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Oct 30, 2025 |
| Silicon | 5.14 PPM |
| Tin | 2.32 PPM |
| Silver | 0.46 PPM |
| Aluminum | 16.66 PPM |
| Chromium | 1.95 PPM |
| Lead | 12.02 PPM |
| Copper | 33.69 PPM |
| Nickel | 1.34 PPM |
| Iron | 314.34 PPM |
| Glycol | POS |
| Water | POS |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.