Orlando, FL ,USA

MADE IN ITALY with Crusher Jaw (Pre Installed) for Cat 307 •308 • Cat 312 and 311D • 311F • 312D • 312D2 • 312E • 312F • 313D2 • 313F • 314D • 314E • 314F • 315F A Linkage and all 7 to 11 Ton Machines (16K to 24K Lb Machines) Jaw Opening - 20.75In / 525mm Jaw Depth - 13.78 In / 350mm Overall Length - 56.9 In / 1 •446mm • Hardox 500 Steel with Replaceable Teeth and Blades • Mounting Heads and Accessories available

MADE IN ITALY Hydraulic Rotating Shear for Cat 349D/352 • 345D •349D2 • 349E • 349F • 352F TB Linkage and Volvo EC330 • EC360 and EC380 - Cat 374D • 374F VB Linkage and all 45-65 Ton Machines - (99K-132K Lb Machines). Shear Overall Length 132 in 3 •361mm •Shear Opening 28 in 700mm •Shear Depth 27 in 690mm • 9 •921 lbs 4 •500 Kg Hardox 500 Steel with Replaceable Blades • Mounting Heads and Accessories available

For Cat 320BL/CL

MADE IN ITALY Hydraulic Rotating Shear for Cat 320 • 325D/329D and all 20-28 Ton - 44K-62K Lb Machines. Shear Overall Length 110 in 2 •785mm •Shear Opening 21 in 530mm •Shear Depth 19 in 495mm • 4 •475 lbs 2 •030 Kg Hardox 500 Steel with Replaceable Blades • Mounting Heads and Accessories available

MADE IN ITALY Hydraulic Rotating Shear for Cat 329 • 325D • 326 • 330GC • 335F and all 26-34 Ton - 57K-75K Lb Machines. Shear Overall Length 112 in 2 •840mm •Shear Opening 23 in 580mm •Shear Depth 20 in 510mm • 5 •578 lbs 2 •530 Kg Hardox 500 Steel with Replaceable Blades • Mounting Heads and Accessories available

MADE IN ITALY Hydraulic Rotating Shear for Cat 336D • 336D2 • 336E • 336F • 340D2 • 340F DB Linkage - 345D/349D • 349D2 • 349E • 349F • 352F TB Linkage and Volvo EC330 • EC360 and EC380 and all 34-40 Ton Machines - 68K-80K Lb Machines. Shear Overall Length 125 in 3 •170mm •Shear Opening 27 in 690mm •Shear Depth 22 in 570mm • 7 •055 lbs 3 •200 Kg Hardox 500 Steel with Replaceable Blades • Mounting Heads and Accessories available

482 mm Center of Pin Boss to Center of Pin Boss • 381 mm Inside to Inside Pin Boss Spacing • To Fit 25 ton to 45 ton Excavators

For Cat 325DL/EL

508 mm Center of Pin Boss to Center of Pin Boss • 355 mm Inside to Inside Pin Boss Spacing • For Cat 330D • 336D and all 32-42 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with: Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

Tier 4 • US EPA Label • JCB 448 TCAE-129 4 Cylinder 173 hp 4.8 L Diesel Engine

Open Operator Station • Deutz 4 Cylinder Diesel Engine • Extendable Strike-off • 3 ft 8 in - 5 ft 9 in Spreading Width • 24 in Conveyor

508 mm Center of Pin Boss to Center of Pin Boss • 355 mm Inside to Inside Pin Boss Spacing • To Fit 40 Ton to 60 Ton

Tier 4 • US EPA Label • JCB 448 TCAE-129 4 Cylinder 173 hp 4.8 L Diesel Engine

584 mm Center of Pin Boss to Center of Pin Boss • 419 mm Inside to Inside Pin Boss Spacing

Ripper w/Curved arm and 120 Next Gen • 1 Cylinder

1 Cylinder

584 mm Center of Pin Boss to Center of Pin Boss • 419 mm Inside to Inside Pin Boss Spacing • DB Linkage - For Cat 336 • John Deere JD/EX350 and all 32-42 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with: Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

508 mm Center of Pin Boss to Center of Pin Boss • 355 mm Inside to Inside Pin Boss Spacing • 32 in. Jaw Opening • 26 in. jaw depth

Tier 4 • US EPA Label • JCB 444 TA4i-81 4 Cylinder 108 hp 4.4 L Diesel Engine

482 mm Center of Pin Boss to Center of Pin Boss • 406 mm Inside to Inside Pin Boss Spacing • D Linkage - For Cat 330 • John Deere JD/EX270 and all 25-35 Ton Excavators - 150mm Tool With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with: Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

For Cat 352FL • 349EL • 345 TB Linkage and Volvo EC330 • EC360 and EC380 (9 •240 Lbs) - All New Teran Hydraulic Hammers are supplied with: Chisel "Moil Point 'M' Type" • 2 Hoses • 1 Set of N2 Nitrogen Charging Kit with N2 Bottle and Pressure Gauge • 1 Spare Seal Kit • Tool Box with Maintenance Tools and Operations Manual.

Fits Cat D6K • D6K2 • D4 Next Gen • 1 Cylinder

MADE IN ITALY Hydraulic Rotating Demolition Pulverizer for Cat 336D and 336D2 • 336E • 336F • 340D2 • 340F DB Linkage - 345D/349D and 349D2 • 349E • 349F • 352F TB Linkage and Volvo EC330 • EC360 and EC380 and all 30-40 Ton Machines (66K to 88K Lb Machines) • Jaw width 20.8 in / 530mm • Jaw Opening 39.7 in / 1 •010mm Overall Length - 1055 in / 2 •660mm • Pulverizor Weight - 6 •547Lbs / 2970Kg • Hardox 500 Steel with Replacement Teeth and Blades • Mounting Heads and Accessories available

MADE IN ITALY Hydraulic Rotating Demolition Pulverizer for Cat 324D • 324E • 326D2 • 326F • 328D • 329D • 329D2 • 329E • 329F • 330D2 • 330F • 335F CB Linkage - 336D and 336D2 • 336E • 336F • 340D2 • 340F DB Linkage and all 25-32 Ton Machines (55K to 70.5K Lb Machines) • Jaw width 20.8 in / 530mm • Jaw Opening 34.6 in / 880mm Overall Length - 94.5 in / 2 •400mm • Pulverizor Weight - 5 •511Lbs / 2500Kg • Hardox 500 Steel with Replacement Teeth and Blades • Mounting Heads and Accessories available

Tier 4 • US EPA Label • JCB 444 TCAE-81 4 Cylinder 108 hp 4.4 L Diesel Engine

2007 US EPA Label • V16 2250 hp Diesel Engine

MADE IN ITALY Hydraulic Rotating Shear for Cat 311 •312 •314 •315F and Cat 307 •308 •309 •310 - Komatsu PC88 - PC120 and All 7-12 Ton Machines - 15.4K to 26.4K Lb Machines • Shear Overall Length - 74 in / 1880mm • Shear Opening - 14 in / 365mm • Shear Depth - 9 in / 240mm • Shear Weight - 1 •411Lbs / 640kg • Hardox 500 Steel with Replaceable Blades • Mounting Heads and Accessories Available

VB/VB2 Linkage for Cat 365 •374 Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

MADE IN ITALY Hydraulic Rotating for Cat 309 - 315 and all 9 to 15 Ton Machines Jaw Opening - 25 In Jaw Width - 15.5 In Overall Length - 71.5 In • Pulverizer Wt 2 •645Lbs Hardox 500 Steel with Replaceable Teeth and Blades • Mounting Heads and Accessories available

For Cat 330BL/C/CL and all 28-35 Ton Excavators - 150mm Tool With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with: Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

MADE IN ITALY Hydraulic Rotating Demolition Pulverizer for Cat 320 • 319D • 320D • 320E • 321D • 323E • 323F • 325F B Linkage - 324D • 324E • 326D2 • 326F • 328D • 329D • 329D2 • 329E • 329F • 330D2 • 330F • 335F CB Linkage and all 20 to 26 Ton Machines (44K to 57.3K Lb Machines) • Jaw width 19.7 in / 500mm • Jaw Opening 33.5 in / 840mm Overall Length - 90.6 in / 2 •300mm • Pulverizor Weight - 4 •400Lbs / 2 •000Kg • Hardox 500 Steel with Replacement Teeth and Blades • Mounting Heads and Accessories available

For John Deere 200 • 210

JC Linkage - Hardox 450 on all Main Contact Points. Reinforcement Plates - With Heel Shrouds • Lip Protectors • 4 Side Protectors and 5 RC Tips

533 mm Center of Pin Boss to Center of Pin Boss • 381 mm Inside to Inside Pin Boss Spacing • Kobelco SK330 • SK350LC With Side Cutters • Side Protectors • Heel Shrouds and Lip Protectors 6RC Tips

609 in Center of Pin Boss to Center of Pin Boss • 431 in Inside to Inside Pin Boss Spacing

508 in Center of Pin Boss to Center of Pin Boss • 381 in Inside to Inside Pin Boss Spacing

NEW ABF System (Anti-Blank Firing) B Linkage For all 18-25 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

NEW ABF System (Anti-Blank Firing) B Linkage For all 18-25 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

2013 US EPA Label • Cat C32 V13 32.1 L Engine

457 mm Center of Pin Boss to Center of Pin Boss • 304 mm Inside to Inside Pin Boss Spacing • B Linkage For all 18-25 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

457 mm Center of Pin Boss to Center of Pin Boss • 304 mm Inside to Inside Pin Boss Spacing • B Linkage For all 18-25 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

B Linkage For all 18-25 Ton Excavators - With Auto - Lubrication Pre-Disposition. Box Type - All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

CB Linkage for CAT 325D • 329 • 330GC •335F • All 22-28 Ton Excavators - With Auto Lubrication Pre-Disposition. All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set of N2 Nitrogen Charging Kit with N2 Bottle (Empty) and Pressure Gauge • 1 Spare Seal Kit • Tool Box with Maintenance Tools and Operations Manual.

MADE IN ITALY with Crusher Jaw (Pre Installed) for Cat 304 to Cat 308 and all 4 to 8 Ton Machines (9K to 18K Lb Machines) Jaw Opening - 16.15In / 410mm Jaw Depth - 9.85 In / 250mm Overall Length - 40.2 In / 1 •020mm • Hardox 500 Steel with Replaceable Teeth and Blades • Mounting Heads and Accessories available

TB Linkage - 3.10m3 for CAT 345 • 345D • 349D • 349D2 • 349E • 349F • 352F and Volvo EC330 • EC360 and EC380 with Side Cutters • Side Protectors • Heel Shrouds • Lip Protectors • Reinforcement Plates and 6RC Tips

TB Linkage - 3.10m3 for CAT 345 • 345D • 349D • 349D2 • 349E • 349F • 352F and Volvo EC330 • EC360 and EC380 with Side Cutters • Side Protectors • Heel Shrouds • Lip Protectors • Reinforcement Plates and 6RC Tips

Tier 3 • US EPA Label • JCB 444 TCAE-97 4 Cylinder 130 hp 4.4 L Diesel Engine

406 mm Center of Pin Boss to Center of Pin Boss • 254 mm Inside to Inside Pin Boss Spacing

For all 18-25 Ton 332mm FS - With Auto-Lubrication Pre-Disposition Box Type Cat 320 B Linkage • Komatsu PC200/220 (80mm 12.90 in (330 mm) Face Spread 18.00 in (450 mm) Front pin to back)- All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

Cat 3512 V12 1239 kW 51.8 L Diesel Engine

Cat Diesel Engine

For all 18-25 Ton 332mm FS - With Auto-Lubrication Pre-Disposition Box Type Cat 320 B Linkage • Komatsu PC200/220 (80mm 12.90 in (330 mm) Face Spread 18.00 in (450 mm) Front pin to back)- All New Teran Hydraulic Hammers are supplied with Chisel Moil Point M Type • 2 Hoses • 1 Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • 1 Spare Seal Kit • Toil Box With Maintenance Tools And Operations Manual.

MADE IN ITALY for Cat 320 • 319D • 320D • 320E • 321D • 323E • 323F • 325F B Linkage - 324D • 324E • 326D2 • 326F • 328D • 329D • 329D2 • 329E • 329F • 330D2 • 330F • 335F CB Linkage and all 18 to 22 Ton Machines (39K to 49K Lb Machines) Gap Opening - 84.5 In / Width - 39.5 In Hardox 500 Steel with Replaceable Cutting Edge • Mounting Heads and Accessories available

DB Linkage - 1.7 m3 Unheaped for CAT 336D • 336D2 • 336E • 336F • 340D2 • 340F with Side Cutters • Side Protectors • Heel Shrouds • Lip Protectors • Reinforcement Plates and 6RC Tips