122 Photos
Boerne, TX
295 hrs
KBCGF15CERZD48353
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#14098042
In yard
No
Year
2024
Manufacturer
Model
Asset type
Serial number or VIN
KBCGF15CERZD48353
Features
2024 US EPA Label, Swing Boom, 3 ft 7 in Stick, Auxiliary Hydraulic Plumbing, Backfill Blade, 9 in Rubber Tracks, Expandable Width Tracks, Manual Quick Coupler, 8 in Digging Bucket
Notes
COMES WITH IRONCLAD ASSURANCE. SUBJECT TO TEXAS SALES TAX.
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
KBCGF15CERZD48353
CE Mark
No CE mark found
Hour Meter / Odometer
295 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Hand Rails
Exterior Lights
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Swing Brake
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Seats/Armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
2024 US EPA Label
Emission Label
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.
Hydraulic Tank
Hydraulic Control Pattern Changer
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Swing Motor
Boom Swing Cylinders
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Blade Lift Cylinder
Blade Angle Cylinders
Limited Function Check
The hydraulic system was operational.
Boom Condition
Stick Condition
Swing Tower Pivot
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket
Pins and Bushings Stick to Coupler
Heavy movement, Pin sticking out
Turntable Bearing
Limited Function Check
The main components were operational in a limited check.
Left Roller Frame
Left Track Tensioner
Left Grouser Height
21 mm
Left Track Rollers
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Grouser Height
22 mm
Right Track Rollers
Right Sprocket
Excavator Bucket Condition
Cutting Edge / Teeth / Adapters
Quick Coupler
Not operationally checked
Blade Condition
Blade Cutting Edge Condition
Items must be paid in full by Friday, November 7, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.