



82 Photos
Located
Stanley, NC
Stanley, NC
Usage
703 hrs
703 hrs
Serial number
CAT0299DHDY910204
CAT0299DHDY910204
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15478858
In yard
No
Features
Enclosed Cab, Air Conditioner, Joystick Steering, Self Leveling, Rear View Camera, Tier 4, 2022 US EPA Label, Requires Diesel Exhaust Fluid, 18 in Track Belts, Hydraulic Coupler, 86 in Multi-Purpose Bucket, Counterweight Kit

















Serial Number / VIN
CAT0299DHDY910204
Hour Meter / Odometer
703 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Scratches
Sheet Metal (fiberglass) Condition
Steps/Ladders
Good
Hand Rails
Good
Glass
Good
Exterior Lights
Operational


Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual


















Seats/Armrests
Mirrors
Good
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational; Cool but not cold
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.













Engine
2022 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.



Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.








Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Loader Lift Cylinders
Bucket Tilt Cylinders
Multi Purpose Bucket Cylinders
Limited Function Check
The hydraulic system was operational.






Frame Condition
Belly Pans
Lift Arm Condition
Chassis to Arm Pins
Quick Coupler to Arms Pins
Limited Function Check
The main chassis components were operational in a limited check.









Roller Frames
Grouser Height Measurement
Left side: 21 mm, Right side: 21 mm
Track Belt Condition
Normal wear Cuts
Rubber Belt Drive Lugs
Track Tensioners
No visible damage
Front Idler Wear
Rear idler wear
Track Rollers
Sprockets






Quick Coupler
Operational
Loader Bucket Condition
Loader Bucket Cutting Edge/Shanks/Teeth
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Jul 08, 2026 | Jul 08, 2026 |
| Silicon | 2.4 PPM | 1.48 PPM |
| Tin | 0.92 PPM | 0.15 PPM |
| Silver | 0 PPM | 0.24 PPM |
| Aluminum | 1.28 PPM | 6.01 PPM |
| Chromium | 0.33 PPM | 0.42 PPM |
| Lead | 1.31 PPM | 3.08 PPM |
| Copper | 10.98 PPM | 21.62 PPM |
| Nickel | 0.66 PPM | 0.72 PPM |
| Iron | 27.74 PPM | 59.98 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.