186 Photos
2022 Rubble Master RM90GO! Tracked Impact Crusher Plant
Located
Milliken, CO
Milliken, CO
Usage
1,142 hrs
1,142 hrs
Serial number
05.428
05.428
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15753890
In yard
No
Features
John Deere 6 Cylinder 260 hp 6.8 L Diesel Engine, Requires Diesel Exhaust Fluid, Belt Feeder Rubble Master 35 in Impact Crusher, 3 kW Drive Motor, 6 ft 8 in x 3 ft 8 in Single Deck Screen, 31 in Wide Feed Conveyor, 39 in Wide Fines Discharge Conveyor, 32 in Wide Under Crusher Conveyor, 31 in Crusher to Screen Conveyor, 18.5 in Wide Under Screen Conveyor, 15.5 in Wide Left Discharge Conveyor, 39 in Wide End Discharge Conveyor, x 31 ft 5 in Cross Belt Magnet, Radio Remote Control, Track Shoes
General Appearance
Serial Number / VIN
05.428
Hour Meter / Odometer
1142 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Control Station
Gauges
Missing service gauge gauges are inoperable
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.
Electrical
Electric Motors
Manufacture brand MOLL-motor
Switch Gear
Number of switches 1
Disconnect Switch
Not operationally checked
Cables and Connections
Engine
Emissions Status
US EPA Label not legible
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check (Engine)
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Crusher Door Cylinders
Conveyor Cylinders
Power Travel Drive System
2 Travel Speeds
Limited Function Check
The hydraulic system was operational.
Chassis
Feed Hopper
Length @ top: 13 ft, Width @ top: 67 in
Crusher Base Frame
Crusher Chamber Frame
Jaw, Blow Bar and Anvil Wear Surface
Jaw width and spacing between jaws 5.5 in
Crusher Drive System
VSI / HSI Crusher Chamber
Feed Conveyor Condition
Feed Conveyor Frame
Feed Conveyor Drive Motor
Feed Conveyor Rollers
Feed Conveyor Head and Tail Pulley
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Screen Deck
Wear and buildup
Deck Frames / Wear Bars
Chute Condition
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Grouser Height
21 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Right Roller Frame
Right Grouser Height
21 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Idler
Right Sprocket
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.