100 Photos
2022 (unverified) Irock TJ-2745 Jaw Crusher
Located
North East, MD
North East, MD
Usage
1,706 hrs
1,706 hrs
Serial number
78442
78442
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15682018
In yard
Yes
Features
2021 US EPA Label, Cat C9.3B 6 Cylinder 375 hp 9.3 L Diesel Engine, Requires Diesel Exhaust Fluid, 4 ft x 11 ft 8 in Vibratory Grizzly Feeder w/Hydraulic Fold Hopper Wings, 45 in Jaw, 28 in Wide Under Crusher Conveyor, 25 in Wide Right Discharge Conveyor, 40 in Wide End Discharge Conveyor, 30 in x 5 ft 2 in Cross Belt Magnet, Radio and Cable Remote Control, Hydraulic Leveling, 16 in Triple Grouser Track Shoes, Equipment-from-Core-Equipment-Group
Notes
Additional components located in yard office
General Appearance
Serial Number / VIN
78442
Hour Meter / Odometer
1706 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Control Station
Gauges
Operational
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.
Engine
Emissions Status
2021 US EPA Label
Emission Certification Label
US EPA certification label
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
DEF / AdBlue Tank
Limited Function Check (Engine)
The engine started and ran.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Not operationally checked
Valves
Hydraulic Tank
Hoses
Crusher Door Cylinders
Conveyor Cylinders
Front right and left discharge conveyor cylinder are bent
Stabilizer Jack Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Feed Hopper
Length @ top: 135 in, Width @ top: 92 in, Grizzly length: 52 in, Width between grizzly bars: 3 in
Crusher Base Frame
Crusher Chamber Frame
Jaw, Blow Bar and Anvil Wear Surface
Crusher Drive System
Not functionally checked
Feed Conveyor Drive Motor
Not operationally checked
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Not operationally checked
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Deck Frames / Wear Bars
Chute Condition
Carrier
Undercarriage
Left Roller Frame
Left Track Pads
Left Grouser Height
24 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Pads
Right Grouser Height
24 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Idler
Right Sprocket
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.