110 Photos
2021 Sandvik QJ341 Tracked Jaw Crushing Plant
Located
Charlotte, NC
Charlotte, NC
Usage
4,955 hrs
4,955 hrs
Serial number
QJ341-10240
QJ341-10240
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15801069
In yard
Yes
Features
Tier 4, 2020 US EPA Label, Cat C9.3B 6 Cylinder 375 hp 9.3 L Diesel Engine, Requires Diesel Exhaust Fluid, Sandvik 43 ft x 13 ft Vibratory Grizzly Feeder w/Hydraulic Fold Hopper Wings, Pre-Screen, Sadvik C12 43 in x 32 in Jaw Crusher, 40 in Wide Under Crusher Conveyor, 24 in Wide Right Discharge Conveyor, 40 in Wide End Discharge Conveyor, Erie’s 30 in x 6 ft Cross Belt Magnet, Radio and Cable Remote Control, Auto Lube, 20 in Triple Grouser Track Shoes
General Appearance
Serial Number / VIN
QJ341-10240
Hour Meter / Odometer
4955 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Control Station
Gauges
Operational
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted. Fault code present, safety stop right side damaged.
Engine
Emissions Status
2020 US EPA Label
Emission Certification Label
US EPA certification label
Blow by @ idle (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check (Engine)
The engine started and ran. Oil level low.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Conveyor Cylinders
Stabilizer Jack Cylinders
Power Travel Drive System
Travels properly
Limited Function Check
The hydraulic system was operational.
Chassis
Feed Hopper
Length @ top: 14’, Width @ top: 8’, Grizzly length: 48”, Width between grizzly bars: 3”
Crusher Base Frame
Crusher Chamber Frame
Worn, damaged panels and supports
Jaw, Blow Bar and Anvil Wear Surface
Moderate to heavy wear
Crusher Drive System
Damaged shaft shields
Discharge Conveyor Condition
Cuts and gouges
Discharge Conveyor Drive Motor
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Deck Frames / Wear Bars
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
25 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
25 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Idler
Right Sprocket
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.