48 Photos
2021 Generac MDG25IF4 20 kW Mobile Generator Set
Located
North East, MD
North East, MD
Usage
12,036 hrs
12,036 hrs
Serial number
7FSBG1116MB731669
7FSBG1116MB731669
Loading...
Detailed equipment information
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#14603350
In yard
Yes
Features
25 kVA/20 kW Rated 3 Phase Output, 208 V / 480 V Rated Voltage, 17.5 kVA,/17.5 kW, Rated Single Phase Output, 240 V Rated Voltage, 240 V & 120 V Receptacles, Bottom Mounted Fuel Tank, 2021 US EPA Label, Isuzu BZ-4LE2T 4 Cylinder 30 kW 2.2 L Diesel Engine, Ball Hitch Carrier Trailer
Notes
<br><br>**No Title available. Bill of Sale will be provided upon request to transfer ownership**
General Appearance
Serial Number / VIN
7FSBG1116MB731669
Unit Serial Number
3008731669
Hour Meter / Odometer
12036 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Generator
Disconnect Switch
Not operationally checked
Cables and Connections
Emergency Shut Off Switch
Operational
Receptacles
Not operationally checked
Power Generation
The main components appear to be in place. The generator is producing electrical current.
Control Station
Gauges
Operational
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Emissions Status
2021 US EPA Label
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Fuel System
Operational
Exhaust System
Radiator
Oil Leaks
Side of engine, Oil Pan
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Trailer Chassis
Axle Condition
Left Rear Tire
Right Rear Tire
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
No visible damage
Lights/Wiring Condition
Not operationally checked
Frame Rails/ Main Beams Condition
No visible damage
Landing Gear / Tongue Jack
Fuel Tank Condition
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Feb 19, 2026 |
| Silicon | 1.27 PPM |
| Tin | 0.36 PPM |
| Silver | 0.14 PPM |
| Aluminum | 0.8 PPM |
| Chromium | 0.49 PPM |
| Lead | 0.31 PPM |
| Copper | 1.03 PPM |
| Nickel | 0.02 PPM |
| Iron | 10.81 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Wednesday, May 13, 2026. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(410) 287-4330Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.