



168 Photos
Located
Sharonville, OH
Sharonville, OH
Usage
5,559 hrs
5,559 hrs
Serial number
23200117
23200117
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15608227
In yard
No
Features
Rear View Camera, 2019 US EPA Label, 7 ft 3 in Cutting Width, 13 in Milling Depth, Water System, 33 in Discharge Conveyor, Air Compressor, 12 in Triple Grouser Track Shoes w/Rubber Pads

























Serial Number / VIN
23200117
CE Mark
CE Marked
Hour Meter / Odometer
5559 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational

















Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational, Fault codes
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.

Travel Alarm
Operational
Horn
Operational
Seat Belts
Not equipped
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual













Engine
2019 US EPA Label
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks Residue on side of engine, no dripping leak during inspection
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.



























































Drive/Propel Motors
Final Drives
Limited Function Check
The drivetrain was operational.
Rotor Drive Clutch
Fluid accumulation
Rotor Drive Pulleys
Rotor Drive Belt
Rotor Final Drive
Residue
Rotor Drive Brake
Rotor Shaft Bearings
Residue
Limited Function Check
The main chassis components functioned.
Main Frame
Track Frame
Rotor Mandrel
Holders and Cutting Bits
Heavy wear
Roller Frame Legs
Rotor Compartment Doors
Conveyor Frame
Conveyor Rollers
Collecting Conveyor
33 " Conveyor
Discharge Conveyor
Water Tank
Not operationally checked
Water Spray System
Not operationally checked
Pressure Washer
Not operationally checked
Air Compressor
Not operationally checked
Limited Function Check
The components that could be checked functioned with wear.























Pumps (Hydraulics)
Hydraulic Motors
Valves
Dripping leak
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Movement
Limited Function Check
The hydraulic system was operational.






























Track Tensioners
No visible damage
Track Pads
Grouser Height
Left Side: 20 mm, Right Side: 20 mm
Track links
Pins and Bushings Turned?
Yes
Track Rollers
Seepage
Idlers
Sprockets
No visible issues
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 07, 2026 |
| Silicon | 0 PPM |
| Tin | 1.72 PPM |
| Silver | 0 PPM |
| Aluminum | 1.29 PPM |
| Chromium | 0.31 PPM |
| Lead | 0.89 PPM |
| Copper | 0 PPM |
| Nickel | 0.26 PPM |
| Iron | 10.39 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.