144 Photos
2020 Cat PM622 Tracked Cold Planer
Located
Indianapolis, IN
Usage
3,338 hrs
Serial number
CAT00PM6CTPH00108
Loading...
Inspection report:
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12778851
In yard
No
Year
2020
Manufacturer
Model
Asset type
Serial number or VIN
CAT00PM6CTPH00108
Features
Canopy, 2016 US EPA Label, Requires Diesel Exhaust Fluid, 88 in Cutting Width, 13 in Milling Depth, Water System, 33 in Discharge Conveyor, Grade Control System, Air Compressor, 12 in Triple Grouser Track Shoes w/Rubber Inserts
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT00PM6CTPH00108
CE Mark
No CE mark found
Hour Meter / Odometer
3338 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Control Station
Seats/Armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational, Low coolant light stays on
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Not equipped
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Engine
Engine
2016 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Chassis
Drive/Propel Motors
Final Drives
Limited Function Check
The drivetrain was operational.
Rotor Drive Clutch
Rotor Drive Pulleys
Limited Function Check
The main chassis components functioned.
Main Frame
Track Frame
Rotor Mandrel
Holders and Cutting Bits
Roller Frame Legs
Conveyor Frame
Conveyor Rollers
Collecting Conveyor
Discharge Conveyor
Water Tank
Not operationally checked
Air Compressor
Not operationally checked
Limited Function Check
The main components functioned with minor wear throughout.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Undercarriage
Track Tensioners
Operational
Track Pads
Grouser Height
Track links
Pins and Bushings Turned?
No
Carrier Rollers
Track Rollers
Idlers
Sprockets
No visible issues
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(863) 420-9919Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.