



174 Photos
Located
Clarksville, TN
Clarksville, TN
Usage
136 hrs
136 hrs
Serial number
CATAP255VD8A00496
CATAP255VD8A00496
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15652702
In yard
No
Features
Dual Controls, 2018 US EPA Label, Cat AS3143 Electric Heated 4 ft - 8 ft Screed, On Board Generator, Ultrasonic Sensors, 8 in Track Shoes w/Rubber Pads
































Serial Number / VIN
CATAP255VD8A00496
Hour Meter / Odometer
136 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational




Travel Alarm
Operational
Horn
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual



















Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Screed Control Switches
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.











Engine
2018 US EPA Label
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.











Transmission
Operational
Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Drive Chains/Sprockets
Limited Function Check
The drivetrain was operational.































Pumps (Hydraulics)
Valves
Hydraulic Tank
Hydraulic Motors
Hoses (Hydraulics)
Hopper Wing Cylinders
Screed Tow Point Cylinders
Screed Lift Cylinders
Screed Extension Cylinders
Limited Function Check
The hydraulic system was operational.






































Screed Serial Number
Serial Number: A8A00497
Screed Tow Arms
Screed Bottom Plate
Hopper Wings
Metering Gates
Manual
Auger/ Screw Condition
Feed Conveyors
Conveyor Drive Chains and Sprockets
Push Rollers
Screed Heaters
Screed Tow Point Adjustment
Powered adjustment, Operational
Mat Thickness Adjusters
Powered adjustment, Operational
Extension Tubes
End Gates
Spray Down System
Limited Function Check
The main components were operational in a limited check.




























Left Roller Frame
Left Track Tensioner
Left Track Shoes
Left Grouser Height
15 mm
Left Track Links
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Shoes
Right Grouser Height
16 mm
Right Track Links
Right Track Rollers
Right Idler
Right Sprocket
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 10, 2026 |
| Silicon | 0 PPM |
| Tin | 1.05 PPM |
| Silver | 0 PPM |
| Aluminum | 5.87 PPM |
| Chromium | 0.27 PPM |
| Lead | 0.89 PPM |
| Copper | 15.07 PPM |
| Nickel | 0.05 PPM |
| Iron | 8.21 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.