99 Photos
2018 John Deere 950K Crawler Dozer
Located
Humble, TX
Humble, TX
Usage
12,818 hrs
12,818 hrs
Serial number
1T0950KPAHF317776
1T0950KPAHF317776
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15298851
In yard
Yes
Features
Enclosed Cab, Air Conditioner, 186 in Wide PAT Blade, 4 Cylinder Multi-Shank Ripper, 36 in Single Grouser Track Shoes
General Appearance
Serial Number / VIN
1T0950KPAHF317776
Hour Meter / Odometer
12818 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
US EPA Not Compliant
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Service Brakes
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Blade Lift Cylinders
Blade Angle Cylinders
Blade Tilt Cylinders
Ripper Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Blade Condition
Blade Cutting Edge Condition
Reversible-not turned
Ripper Condition
Push Arm/C-Frame Condition
Tilt Linkage Pins and Bushings
Angle Linkage Pins and Bushings
Blade Trunnions/bushings
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly Pans
Specialty
Undercarriage
Pivot Shafts
Equalizer Bar Pivot Points
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
58 mm
Left Track Links
Left Track Bushings
Bushings have been turned, Rotating Bushings
Left Carrier Rollers
Left Track Rollers
Left Front Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
55 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Front Idler
Right Sprocket
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 27, 2026 |
| Silicon | 0.72 PPM |
| Tin | 0.76 PPM |
| Silver | 0 PPM |
| Aluminum | 1.63 PPM |
| Chromium | 1.06 PPM |
| Lead | 2.32 PPM |
| Copper | 1.63 PPM |
| Nickel | 1.1 PPM |
| Iron | 18.44 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.