49 Photos
Las vegas, NV
249,168 mi (400,998 km)
3ALACXFC8JDJU3586
Loading...
An inspection report will be available soon. Please check back later.
ID number
#13959838
In yard
Yes
Year
2018
Manufacturer
Model
Asset type
Serial number or VIN
3ALACXFC8JDJU3586
Features
Cummins B6.7 6 Cylinder 6.7 L Diesel 280 hp Engine, 2017 US EPA Label, Requires Diesel Exhaust Fluid, 9244 Engine hrs, Allison 2500 Automatic Transmission, 12000 lb Front Axle, 21000 lb Rears, Detroit DA-RS-21.0-4 Drive Axles, 5.88:1 Axle Ratio, 33000 lb GVWR, 295/75R22.5, Spring Suspension, 155 in Wheelbase, PTO, Lands Unused Powder Coated 2000 gal Steel Tank, PTO Driven Pump, 5 ft 6 in, Spray Bar, Front Spray, Rear Spray, Side Spray
Notes
; THE CLOSING TIMES OF LOTS 344 THRU 357 ARE TIED TOGETHER. IF A BID IS RECEIVED, THEN A TIME EXTENSION WILL BE APPLIED TO ALL LOTS. ONCE THE TIME CLOSES, THE HIGH BIDDER ON EACH PIECE WILL BE THE WINNER.
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
3ALACXFC8JDJU3586
Second Serial Number/VIN Photo
Hour Meter / Odometer
249168 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Emissions Information
2017 US EPA Label, Requires Diesel Exhaust Fluid
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Brakes
The brakes are operational.
Engine Hours
9244 Engine hrs
Limited Function Check
The main components are in place and operational as noted.
Items must be paid in full by Saturday, September 13, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.