64 Photos
Humble, TX
1,551 hrs
CAT00D3KAKL202932
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#13172070
In yard
Yes
Year
2018
Manufacturer
Model
Asset type
Serial number or VIN
CAT00D3KAKL202932
Features
Open Operator Station, Requires Diesel Exhaust Fluid, 123 in Wide PAT Blade, 25 in Single Grouser Track Shoes, SystemOne Undercarriage
Notes
Current warranty coverage includes 60 months or 3,000 hours for emissions components. Please confirm with your local dealer to ensure eligibility
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT00D3KAKL202932
Hour Meter / Odometer
1551 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Not checked
Drivetrain Controls
Will not go to full throttle
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Heater
Not operationally checked
Limited Function Check
The main components are in place and operational as noted.
Engine
No US EPA Label Present Requires Diesel Exhaust Fluid
Blow-by (subjective visual observation)
Recirculating system
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
DEF / AdBlue Tank
Limited Function Check
Will not go to full throttle
Service Brakes
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Blade Lift Cylinders
Blade Angle Cylinders
Blade Tilt Cylinders
Limited Function Check
The hydraulic system was operational.
Blade Condition
Blade Cutting Edge Condition
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Tilt Linkage Pins and Bushings
Angle Linkage Pins and Bushings
Blade Trunnions/bushings
Shims remaining
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly Pans
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
42 mm
Left Track Links
Left Track Bushings
Rotating Bushings
Left Carrier Rollers
Left Track Rollers
Left Front Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
42 mm
Right Track Links
Right Track Bushings
Rotating Bushings
Right Carrier Rollers
Right Track Rollers
Right Front Idler
Right Sprocket
Oil Sample Analysis
engine | |
---|---|
date of analysis | May 07, 2025 |
Silicon | 16.04 PPM |
Tin | 0 PPM |
Silver | 0 PPM |
Aluminum | 0.39 PPM |
Chromium | 0 PPM |
Lead | 0.15 PPM |
Copper | 14.31 PPM |
Nickel | 0 PPM |
Iron | 4.76 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Payment optionsGet your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.