118 Photos
2017 Wirtgen WR250 Cold Planer
Located
Montmagny, QC, CAN
Montmagny, QC, CAN
Usage
4,953 hrs
4,953 hrs
Serial number
08WR0209
08WR0209
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15687629
In yard
No
Features
Enclosed Cab, Air Conditioner, Rear View Camera, 7 ft 6 in Cutting Width, 12 in Milling Depth, Water System, Auto-Lube System
General Appearance
Serial Number / VIN
08WR0209
CE Mark
CE Marked
Hour Meter / Odometer
4953 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
1 bent step
Hand Rails
Glass
Exterior Lights
Operational, 1 light missing right side lights are not operational
Control Station
Seats/Armrests
Mirrors
1 left and 1 right mirror cracked
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Inoperable, A/C is not very cold
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Not equipped
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Engine
Engine
US EPA Not Compliant
Emission Label
A/C Compressor
Can’t see compressor, cab temp is not cold
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Valve cover
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Chassis
Drive/Propel Motors
Final Drives
Limited Function Check
The drivetrain was operational.
Rotor Drive Clutch
Rotor Drive Pulleys
Rotor Drive Belt
Rotor Final Drive
N/A
Rotor Drive Brake
Rotor Shaft Bearings
Limited Function Check
The main chassis components functioned.
Main Frame
Rotor Mandrel
Holders and Cutting Bits
Rotor Compartment Doors
Water Tank
Water Spray System
Not operationally checked
Limited Function Check
The main components functioned with minor wear throughout.
Tire Size
28L-26 front tires
Tire Condition
Wheel Condition
Wheel Studs
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Some minor seepage visible
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Tuesday, January 8, 2030. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.