104 Photos
2017 Roadtec RP170E Wheel Asphalt Paver
Located
Kenova, WV
Kenova, WV
Usage
4,516 hrs
4,516 hrs
Serial number
RP170E4027
RP170E4027
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15716972
In yard
No
Features
Dual Controls, MOBA magic II Electric Heated 8 ft 6 in - 15 ft 6 in Screed
General Appearance
Serial Number / VIN
RP170E4027
Hour Meter / Odometer
4516 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The gauge registers in the operating range. 54 PSI
Screed Control Switches
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
US EPA Label not legible
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Operational
Rear Drive Axle
Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Drive Chains/Sprockets
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hydraulic Motors
Hoses (Hydraulics)
Hopper Wing Cylinders
Steering Cylinders
Screed Tow Point Cylinders
Screed Lift Cylinders
Screed Extension Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Screed Tow Arms
Screed Bottom Plate
Hopper Wings
Metering Gates
Powered
Auger/ Screw Condition
Feed Conveyors
Conveyor Drive Chains and Sprockets
Push Rollers
Screed Heaters
Not operationally checked
Screed Slope Adjustment
Not operationally checked
Screed Crown Adjustment
Manual adjustment
Mat Thickness Adjusters
Operational
Extension Tubes
End Gates
Front Tire/Wheel Condition
Rear Wheel Condition
Rear Tire Condition
Wheel Studs
Limited Function Check
The main components were operational in a limited check.
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.