89 Photos
2017 MTS 3630T Tracked Scraper Tractor
Located
Decorah, IA
Decorah, IA
Usage
4,368 hrs
4,368 hrs
Serial number
MTS-T-01082
MTS-T-01082
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14994874
In yard
No
Features
Enclosed Cab, Air Conditioner, Powershift, Requires Diesel Exhaust Fluid, Camso 30 in Tracks, 3 Rear Remotes, Scraper Hitch
Notes
Please see seller supplied maintenance record and fluid sample invoices attached in the documentation section below.
General Appearance
Serial Number / VIN
MTS-T-01082
CE Mark
No CE mark found
Hour Meter / Odometer
4368 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Mirrors
Seats/Armrests
Passenger seat
Hydraulic Controls
Not operationally checked
Steering Control
Drivetrain Controls
Oil Pressure
56 PSI
Warning Lights
Check engine light stays on
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
After jump starting, the engine ran. The engine would not re-start after shutting down without jump starting.
Drivetrain
Transmission
Limited Function Check
The drivetrain was operational.
Chassis
Articulating Center Pins
Frame Condition
Brake Type
Hydrostatic
Master Cylinder/Brake Control
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Hydraulics
Pumps (Hydraulics)
Rear Remote Hydraulic Circuits
Not operationally checked
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Apr 08, 2026 |
| Silicon | 1.94 PPM |
| Tin | 1.06 PPM |
| Silver | 0 PPM |
| Aluminum | 0.78 PPM |
| Chromium | 0.16 PPM |
| Lead | 1.56 PPM |
| Copper | 1.35 PPM |
| Nickel | 0.17 PPM |
| Iron | 12.69 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.