



139 Photos
Located
Durant, OK
Durant, OK
Usage
6,967 hrs
6,967 hrs
Serial number
CAT00D6NCPBA02426
CAT00D6NCPBA02426
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15763359
In yard
No
Features
Enclosed Cab, Air Conditioner, Pre-Wired for Grade Control, Tier 4, 158 in Wide PAT Blade, 1 Cylinder Multi-Shank Ripper, 865 mm Single Grouser Track Shoes





































Serial Number / VIN
CAT00D6NCPBA02426
CE Mark
No CE mark found
Hour Meter / Odometer
6967 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Glass
Front three wipers inoperable
Exterior Lights
Some not operational, Front lower two lights are not operational



Horn
Inoperable
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual













Seats/Armrests
Mirrors
Hydraulic Controls
Drivetrain Controls
Dash Console
Left console fuse panel cover damaged
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational, Maintenance/Service light stays on, Seat fault, Engine fan fault and Engine fan speed low light stays on
Gauges
Operational
Air Conditioner
Inoperable
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.











Engine
No US EPA Label Present
A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Low coolant
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.



Transmission
Operational
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.






















Pumps (Hydraulics)
Valves
Dripping leak, Back top of transmission area leaking
Hydraulic Tank
Low fluid level
Hoses (Hydraulics)
Blade Lift Cylinders
Heavy pin and bushing movement
Blade Angle Cylinders
Heavy pin and bushing movement
Blade Tilt Cylinders
Heavy pin and bushing movement, Center cylinder leaking
Ripper Cylinders
Limited Function Check
The hydraulic system was operational.



















Blade Condition
Blade Cutting Edge Condition
Reversible-turned
Ripper Condition
Push Arm/C-Frame Condition
Push Arm Pivot/C-FrameTrunnions
Heavy movement
Angle Linkage Pins and Bushings
Blade Trunnions/bushings
Limited Function Check (dozer)
The main components were operational with movement as indicated.
Frame Condition
Belly Pans































Pivot Shafts
Equalizer Bar Pivot Points
Heavy movement
Left Roller Frame
Left Track Tensioner
Wiper seal seeping
Left Track Pads
Left Grouser Height
47 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Left Front Idler
Left Rear Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
48 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Front Idler
Right Rear Idler
Right Sprocket
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.