86 Photos
2014 Volvo G976 AWD Motor Grader
Located
Drummond, NB, CAN
Drummond, NB, CAN
Usage
7,983 hrs
7,983 hrs
Serial number
VCE0G976H09531028
VCE0G976H09531028
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#12034310
In yard
No
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, 2013 US EPA Label, CARB Compliant, 14 ft / 4.27 m Moldboard, Lift Group, 17.5R25 Tires
General Appearance
Serial Number / VIN
VCE0G976H09531028
Hour Meter / Odometer
7983 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Control Station
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
2013 US EPA Label, CARB Compliant
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Rear Drive Axle
Rear Tandems (Chain Drives)
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Hydraulic Tank
Hoses (Hydraulics)
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Saddle Positioning Cylinder
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Y-frame
Y-frame Pivot Trunnion
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins
Front Axle Oscillating Pin
Steering Linkage
Wheel Tilt Linkage
Belly Pans
Limited Function Check (grader)
The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Bridgestone
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Specialty
Blade Condition
Blade Cutting Edge Condition
Front Lift Group
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 23, 2024 |
| Silicon | 0.03 PPM |
| Tin | 2.12 PPM |
| Silver | 0 PPM |
| Aluminum | 0.63 PPM |
| Chromium | 0.2 PPM |
| Lead | 0 PPM |
| Copper | 0.15 PPM |
| Nickel | 0.22 PPM |
| Iron | 2.76 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 2031. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.