



126 Photos
Located
Liberty, TX
Liberty, TX
Usage
12,381 hrs
12,381 hrs
Serial number
90-150
90-150
Loading...
ID number
#14350703
In yard
No
Features
34 ft Minimum 105 ft Maximum Boom Length, Auxiliary Hoist, Rooster Sheave, 1082 lb 45 ton Capacity Johnson 4 Sheave Hook Block, 382 lb 12 ton Capacity Overhaul Ball, Counterweight Removal System, 36 in Triple Grouser Track Shoes, Expandable Width Tracks




























Serial Number / VIN
90-150
CE Mark
No CE mark found
Hour Meter / Odometer
12381 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Glass cracked
Exterior Lights
Operational
Safety Certification Label
There is a safety certification label with a date of 05/28/2026
Safety Certification Report
Safety Certification Report Available
Load Chart
Yes
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual





















Glass
Front top and bottom glass cracked, Roof glass cracked
Seats/Armrests
Seat ripped
Load Moment Indicator
., .
Controls Hydraulic or Air
Load Charts
Chart book in cab
Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Gauges
Operational
Hoist Brakes
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.








Engine
No US EPA Label Present
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Limited Function Check
The engine started and ran.






Drive Chains/Sprockets
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.














Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Auxiliary Hoist
Lift Cylinders
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.





















Main Boom Pins
Main Boom Sections
Sheaves
Boom Head Section
Wear Pads
Boom Angle Indicator
Turntable Bearing
Bottom Covers
Limited Function Check
The main crane components functioned when checked without a load.























Overall width (outside to outside of shoes)
36 in. Overall width
Track Tensioners
Operational
Shoe Width
36 in track shoes
Track links
Pins and bushings
Carrier Rollers
Track Rollers
Front idler wear
See photos
Sprockets
No visible issues





Main Load Block
Overhaul Ball
Counterweights
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 12, 2026 |
| Silicon | 0 PPM |
| Tin | 0.03 PPM |
| Silver | 0 PPM |
| Aluminum | 0.93 PPM |
| Chromium | 0.51 PPM |
| Lead | 0.57 PPM |
| Copper | 0.38 PPM |
| Nickel | 0.34 PPM |
| Iron | 18.42 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.