206 Photos
2012 Watson 2500 TM Rathole Rig on 2013 Kenworth T800 10x6 Twin-Steer Drill Truck
Located
Ponoka, AB, CAN
Usage
354,864 km (220,503 mi)
Serial number
1NKDX4TX9DR960074
Loading...
Detailed equipment information
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#13125908
In yard
Yes
Year
2013
Manufacturer
Model
Asset type
Serial number or VIN
1NKDX4TX9DR960074
Features
John Deere 4045HF485 4 Cylinder Upper Engine, Out and Down Outriggers, Rear Outriggers, Cummins ISX15 6 Cylinder 15 L Diesel 525 hp Engine, Positive Air Shutoff, Webasto Engine Coolant Heater, 7801 Engine hrs, Engine Brake, Eaton Fuller 18-Speed Manual Transmission, Triple Differential Locks, 40000 lb Front Axle, 58000 lb Rears, Dana T69-170HP Drive Axles, 4.30:1 Axle Ratio, 98000 lb GVWR, Aluminum Wheels, 425/65R22.5 Front Tires, 12R24.5 Rear Tires, Dual Steering Boxes, Double Frame, Air Assist Front Suspension, Neway Air Ride Suspension, 315 in Wheelbase, Drill Depth - 36.5M/120Ft, Hole Diameter 12"-96", Outer Kelly Bar 8", Intermediate Bar 6", Inner Solid Bar 4.25", Torque 81,000ft-lbs, Deere Funk Powershift Transmission, 25,000lb Kelly Winch, 12,000lb Service Winch, 38,000lb Crowd Force, Upper Engine Hours 9616
Notes
LOCATED AT 7505 HWY 53 PONOKA AB, CONTACT ROD @ 403.304.7973, MUST BE REMOVED BY MAY 16- PICK UP HOURS ARE 8 AM TO 5 PM-NO WEEKENDS, BUYER RESPONSIBLE FOR LOADOUT , CONSIGNOR HAS DISCLOSED THIS UNIT'S EMISSIONS HAVE BEEN DELETED, * International Buyers will be afforded additional time to remove items from the site
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
1NKDX4TX9DR960074
Hour Meter / Odometer
354864 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
PS Windshield is Cracked
Exterior Lights
Operational
Supporting documents
Engine
Emissions Information
DEF Deleted
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Air Compressor
Operational
Fuel System
Operational
Exhaust System
Diesel Particulate Filter
There is no DPF
Radiator
GOOD
Oil Leaks
Rear of engine, Oil Pan
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Cab
Engine Hours
7801 Engine hrs
Mirrors
Window Controls
Both Power, GOOD
Seats/armrests
Seat Belts
Operational
Steering Control
GOOD
Horn
Air horn operational, Electric horn operational
Oil Pressure
The gauge registers in the operating range. 35 PSI
Warning Lights
Operational
Gauges
Operational
Gear Selector
GOOD
Brake Control
Operational
Engine Brake
Operational
Clutch
Engages
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational, Not operationally checked
Limited Function Check
The main components are in place and operational as noted.
Underbody
Steering Components
Dripping leak from hoses, FAIR FAIR
Steer Axle
GOOD
Transmission
Operational, Dripping leak, Oil Leaking Between Engine and Transmission
Frame Condition
GOOD
Front Drive Axle
GOOD
Center Drive Axle
GOOD
Rear Drive Axle
GOOD
Limited Function Check
The drivetrain was operational without a load.
Suspension Springs/Hangers
GOOD
Suspension Bushings
GOOD
Suspension Air Bags
GOOD
Left Steer Tire
Left Front Drive Tires
Left Center Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Center Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
GOOD
Wheel Studs
GOOD
Hydraulic Tank
GOOD
Limited Function Check - Brakes
The service brakes are operational, The park brake is operational.
Control Station - Upper
Glass
Front Window Cracked
Seats/Armrests
Seat Upholstery is Damaged
Controls Hydraulic or Air
Not Operationally Checked
Oil Pressure
The gauge registers in the operating range. 35 PSI
Warning Lights
Operational
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational, Not operationally checked
Limited Function Check
The main components are in place and operational as noted.
Upper Engine
Emission Certification Label
None found
Starter
GOOD
Radiator
GOOD
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
The engine started and ran.
Hydraulics
Pumps (Hydraulics)
GOOD
Hydraulic Motors
Not operationally checked
Valves
GOOD
Hydraulic Tank
GOOD
Cylinder(s)
Right Side Mast Lift Cylinder is Leaking
Cylinder Pins and Bushings
GOOD
Limited Function Check
The Hydraulic System was Operational in a Limited Function Test. The Main Chassis Components Could Not be Operationally Checked Due to Operator Availability.
Chassis
Boom Condition
GOOD
Drill Drive Head
Not operationally checked
Limited Function Check
The main chassis components could not be operated., The Hydraulic System was Operational in a Limited Function Test. The Main Chassis Components Could Not be Operationally Checked Due to Operator Availability.
Oil Sample Analysis
Oil Sample Analysis
| engine | transmission | |
|---|---|---|
| date of analysis | Dec 27, 2024 | Dec 27, 2024 |
| Silicon | 8.13 PPM | 8.13 PPM |
| Tin | 0 PPM | 0 PPM |
| Silver | 0 PPM | 0 PPM |
| Aluminum | 0.4 PPM | 0.4 PPM |
| Chromium | 0.52 PPM | 0.52 PPM |
| Lead | 0 PPM | 0 PPM |
| Copper | 0.19 PPM | 0.19 PPM |
| Nickel | 1.56 PPM | 1.56 PPM |
| Iron | 10.03 PPM | 10.03 PPM |
| Glycol | NEG | NEG |
| Water | NEG | NEG |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Sunday, May 11, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.(403) 373-3439Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.