



85 Photos
Located
Aix-en-provence, PACD, FRA
Aix-en-provence, PACD, FRA
Serial number
VCE0EC58V00013189
VCE0EC58V00013189
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15350659
In yard
No
Features
Enclosed Cab, Air Conditioner, Swing Boom, Auxiliary Hydraulic Plumbing, Stick Check Valve, Boom Check Valves, Backfill Blade, 400 mm Rubber Tracks, Hydraulic Quick Coupler, 570 mm Digging Bucket, (2) Additional 380 mm and 870 mm Buckets












Serial Number / VIN
VCE0EC58V00013189
CE Mark
CE Marked
Hour Meter / Odometer
Meter inoperable, Hours not accurate for age-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Exterior Lights
Some not operational, rear lights are not operational


Travel Alarm
Inoperable
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational











Seats/Armrests
Mirrors
Missing
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.












Engine
US EPA Not Compliant
Emission Label
A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Limited Function Check
After jump starting, the engine ran.




Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.












Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Hydraulic Center Swivel
Dripping leak
Boom Swing Cylinders
Boom Lift Cylinder(s)
Stick Cylinder
Bucket Cylinder
Blade Lift Cylinder
Limited Function Check
The hydraulic system was operational.













Boom Condition
Stick Condition
Swing Tower Pivot
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Coupler
Turntable Bearing
Limited Function Check
The main components were operational in a limited check.










Left Idler
Left Sprocket
Right Idler
Right Sprocket









Excavator Bucket Condition
Cutting Edge / Teeth / Adapters
Quick Coupler
Operational
Blade Condition
Blade Cutting Edge Condition
Items must be paid in full by Monday, January 7, 2030. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.