172 Photos
2012 John Deere 2154D Processor
Located
Nisku, AB, CAN
Nisku, AB, CAN
Usage
16,228 hrs
16,228 hrs
Serial number
1FF2154DPB0210306
1FF2154DPB0210306
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15524680
In yard
No
Features
Air Conditioner, Cab Screens, 2011 US EPA Label, CARB Compliant, 2011 Waratah HTH622B Processor Head, Computerized Measuring, Steel Feed Rolls, Butt Saw, Top Saw, Right Front Corner Guard, Catwalks, 27.75 in Double Grouser Track Shoes, Rock Guards
General Appearance
Serial Number / VIN
1FF2154DPB0210306
Hour Meter / Odometer
16228 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Several dents
Steps/Ladders
Hand Rails
Almost every exterior handrail bent
Glass
Exterior Lights
Some not operational, 8 front facing pod lights lights are not operational
Safety
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Swing Brake
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Doesn’t move well in high gear
Dash Console
Fuel gauge not operational
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational, Check engine light stays on
Gauges
Fuel gauges are inoperable
Air Conditioner
Kicks on and off
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
2011 US EPA Label, CARB Compliant
Emission Label
A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Unsure of where oil leak is coming from as engine is almost completely covered in oil
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
After jump starting, the engine ran.
Drivetrain
Left Drive Motor
Pulled unevenly
Right Drive Motor
Pulled unevenly
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational as noted.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Low fluid level, Fluid level not on sight glass
Hoses (Hydraulics)
Couple damaged hoses
Auxiliary Hydraulic Plumbing
Operational
Swing Motor
Accumulation of hydraulic fluid underneath
Hydraulic Center Swivel
Accumulation of fluid
Boom Lift Cylinder(s)
Stick Cylinder
Limited Function Check
The hydraulic system was operational.
Chassis
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Coupler
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational in a limited check.
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Specialty
Processor
Hydraulic leak, weld repairs
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
38 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
38 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 16, 2026 |
| Silicon | 3.09 PPM |
| Tin | 1.28 PPM |
| Silver | 0 PPM |
| Aluminum | 8.9 PPM |
| Chromium | 1.74 PPM |
| Lead | 2.29 PPM |
| Copper | 9.17 PPM |
| Nickel | 3.25 PPM |
| Iron | 90.65 PPM |
| Glycol | NEG |
| Water | POS |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Tuesday, January 8, 2030. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.