



55 Photos
Located
Conifer, CO
Conifer, CO
Usage
3,205 hrs
3,205 hrs
Serial number
KMTSK010L36A80296
KMTSK010L36A80296
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14633391
In yard
No
Features
Open Operator Station, Joystick Steering, Control Pattern Changer, 2006 US EPA Label, Manual Coupler, 74 in Bucket












Serial Number / VIN
KMTSK010L36A80296
Hour Meter / Odometer
3205 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Scratches, faded and peeling paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Bent
Hand Rails
Glass
Exterior Lights
Operational, Some not operational, Left front lights are not operational

Travel Alarm
Inoperable
Horn
Inoperable
Seat Belts
Operational
Safety Lock Out/Stop
Operational











Seats/Armrests
Upholstery and cushion damaged
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Missing buttons
Dash Console
Tape on console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.








Engine
2006 US EPA Label
Emission Label
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.

Drive Motors
Limited Function Check
The drivetrain was operational.







Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Loader Lift Cylinders
Dripping leak on the right cylinder
Bucket Tilt Cylinders
Limited Function Check
The hydraulic system was operational.









Frame Condition
Belly Pans
Tire Brands
Road Crew
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Dented beads
Wheel Studs
Missing one lug on all wheels except left front
Lift Arm Condition
Chassis to Arm Pins
Quick Coupler to Arms Pins
Limited Function Check
The main chassis components were operational in a limited check.






Quick Coupler
Not operationally checked, Right side handle bent
Loader Bucket Condition
Bottom is dented
Loader Bucket Cutting Edge/Shanks/Teeth
Reversible-turned
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Jan 29, 2026 | Jan 29, 2026 |
| Silicon | 7.13 PPM | 2.44 PPM |
| Tin | 2.11 PPM | 5.57 PPM |
| Silver | 0 PPM | 0.04 PPM |
| Aluminum | 4.58 PPM | 0.64 PPM |
| Chromium | 0.67 PPM | 0.04 PPM |
| Lead | 0.55 PPM | 1.37 PPM |
| Copper | 1.22 PPM | 62.5 PPM |
| Nickel | 0.27 PPM | 0.1 PPM |
| Iron | 27.78 PPM | 12.21 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.