170 Photos
Nisku, AB, CAN
233,080 km (144,830 mi)
1NKCXBTX37R930220
Loading...
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#13056125
In yard
No
Year
2007
Manufacturer
Model
Asset type
Serial number or VIN
1NKCXBTX37R930220
Features
Cat C15 6 Cylinder 14.6 L Diesel Engine, Positive Air Shutoff, 14494 Engine hrs, Engine Brake, Eaton Fuller 18-Speed Manual Transmission, Spicer 4-Speed Auxiliary Transmission, Double Differential Locks, 36000 lb Front Axle, 68400 lb Rears, 104320 lb GVWR, Air Ride Cab, Aluminum Front Wheels, 445/65R22.5 Front Tires, 12.00R24 Rear Tires, Dual Steering Boxes, Double Frame, Chalmers Rubber over Walking Beam Suspension, 360 in Wheelbase, 26 ft 6 in x 114 in Bed, Center Roll, Live Roll, 25 ft Double Frame Gin Poles, Tulsa 70000 kg Winch, Tulsa 20000 kg Winch, Flip-Over 5th-Wheel Ringfeder
Notes
UNABLE TO PROVIDE DOCUMENTS TO REGISTER/TITLE IN THE USA
Featured Photo
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
1NKCXBTX37R930220
Hour Meter / Odometer
233080 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Supporting documents
Emissions Information
No US EPA Label Present
Limited Function Check
The engine started and ran.
Limited Function Check
The drivetrain was operational.
Brakes
The brakes are operational.
Limited Function Check
The hydraulic system could not be operationally checked.
Engine Hours
14494 Engine hrs
Limited Function Check
The main components are in place and operational as noted.
Oil Sample Analysis
engine | hydraulic | |
---|---|---|
Aluminum | 2.63 PPM | 2.18 PPM |
Chromium | 0.23 PPM | 0.23 PPM |
Copper | 8.24 PPM | 53.48 PPM |
date of analysis | Apr 09, 2025 | Apr 09, 2025 |
Fuel | <5% | N/A |
Glycol | NEG | N/A |
Iron | 34.38 PPM | 9.08 PPM |
Lead | 0 PPM | 0.12 PPM |
Nickel | 0 PPM | 0.13 PPM |
Silicon | 6.04 PPM | 1.4 PPM |
Silver | 0 PPM | 0 PPM |
Tin | 1.05 PPM | 0.57 PPM |
Water | NEG | N/A |
Items must be paid in full by Sunday, May 11, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.