



100 Photos
Located
Cedar City, UT
Cedar City, UT
Usage
1,928 hrs
1,928 hrs
Serial number
P060362
P060362
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15839106
In yard
No
Features
2005 US EPA Label, Cat C16 6 Cylinder 420 hp 15.8 L Diesel Engine, JCI 42 in x 42 ft Vibratory Grizzly Feeder Kodiak K400 Cone Crusher, Spray/Wash System, 42 in Wide Feed Conveyor, 42 in Wide Fines Discharge Conveyor, 42 in Wide Under Crusher Conveyor, 42 in Wide Under Screen Conveyor, 42 in Wide Right Discharge Conveyor, 40 in x 6 ft Cross Belt Magnet, 5 axles, Air Ride, Hydraulic Leveling






Serial Number / VIN
P060362
Hour Meter / Odometer
1928 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.




Gauges
Operational, RPM is not working. gauges are inoperable
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.





Electric Motors
Operational
Cables and Connections










Emissions Status
2005 US EPA Label
Emission Certification Label
US EPA certification label
Block Heater
No
Blow by @ idle (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
The engine started and ran.


























Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Low fluid level
Hoses
Conveyor Cylinders
Stabilizer Jack Cylinders
Limited Function Check
The hydraulic system was operational.
























Feed Hopper
Length @ top: 12’, Width @ top: 10’, Grizzly length: 12, Width between grizzly bars: 10
Crusher Base Frame
Crusher Chamber Frame
Crusher Drive System
VSI / HSI Crusher Chamber
Crusher Roll Condition
Feed Conveyor Condition
42 in wide feed belt
Feed Conveyor Frame
Feed Conveyor Drive Motor
Operational
Feed Conveyor Rollers
Feed Conveyor Head and Tail Pulley
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Operational
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Deck Frames / Wear Bars
Chute Condition

























Axle Condition
Trailer Brakes
Air, Not operationally checked
Brake Lines/Hoses
Not operationally checked
Limited Function Check
The main chassis components could not be operated.
Tire Size
All of the tires are the same size, 11R22.5 Front tires
Tire Condition
Tread Depth
LF 12 /32", LR 0 /32", LMI 10 /32", LMO 8 /32", LRI 10 /32", LRO 10 /32", RRI 10 /32", RRO 8 /32", RMI 6 /32", RMO 8 /32", RR 15 /32", RF 15 /32", LFI 0 /32", LFO 12 /32", RFI 12 /32", RFO 17 /32", Tag LO 10 /32", Tag LI 8 /32", Tag RO 10 /32", Tag RI 8 /32"
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
No visible damage
Power Receptacle Functional
Not operationally checked
Lights/Wiring Condition
Not operationally checked
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
Turn Signals Functional
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Stabilizer Jacks
Number of jacks 4, Hydraulic
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Sep 08, 2026 |
| Silicon | 8.65 PPM |
| Tin | 2.13 PPM |
| Silver | 1.36 PPM |
| Aluminum | 1.53 PPM |
| Chromium | 0.6 PPM |
| Lead | 5.32 PPM |
| Copper | 11.66 PPM |
| Nickel | 0.43 PPM |
| Iron | 61.06 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.