




60 Photos
Amaranth, ON, CAN
392,308 km (243,769 mi)
2NPNHD8X34M833686
Loading...
A qualified Ritchie Bros. employee collected detailed equipment information and performed functional tests on the key components of this asset. You, or a proxy, may also inspect any items on site prior to bidding on auction day.
ID number
#14627073
In yard
Yes
Year
2004
Manufacturer
Model
Asset type
Serial number or VIN
2NPNHD8X34M833686
Features
Cat C7 Diesel Engine, 18389 Engine hrs, Exhaust Brake, Eaton Fuller Manual Transmission, 5443 kg Front Axle, 10433 kg Rears, 3.7:1 Axle Ratio, 15876 kg GVWR, Aluminum Wheels, 11R22.5, Air Ride Suspension, 318 in Wheelbase, Wiltsie Truck Bodies 31 ft x 102 in Wide x 106 in High Body, Liftgate








Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2NPNHD8X34M833686
Second Serial Number/VIN Photo
Hour Meter / Odometer
392308 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.





Emissions Information
No US EPA Label Present
Limited Function Check
The engine started but did not run smoothly.


Limited Function Check
The drivetrain could not be operationally checked.
Brakes
The brakes could not be operationally checked.






















Engine Hours
18389 Engine hrs
Limited Function Check
The item was not operational. The main components could not be operationally checked.























Deficiencies
Deficient Components/Systems Include but are not limited to: Engine Section, Unit Started And Runs For A Couple Minutes And Shuts Off, Unable To Restart
Items must be paid in full by Wednesday, February 18, 2026. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.