84 Photos
2004 Cat 525B 4x4 Track Skidder
Located
Emmett, ID
Emmett, ID
Usage
22,474 hrs
22,474 hrs
Serial number
CAT0525BL3KZ01344
CAT0525BL3KZ01344
Loading...
ID number
#15106647
In yard
No
Features
Screens, Blade, cat Grapple, Single Arch, 30.5L32 Tires
General Appearance
Serial Number / VIN
CAT0525BL3KZ01344
CE Mark
No CE mark found
Hour Meter / Odometer
22474 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Safety
Travel Alarm
Inoperable
Horn
Inoperable
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
US EPA Not Compliant
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Operational
Front Drive Axle
Rear Drive Axle
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses/Lines - Skidder
Boom Lift Cylinder(s)
Grapple Cylinders
Blade Lift Cylinders
Seepage from cylinder heads
Steering Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Grapple Boom Condition
Chassis to Arm Pins
Boom to Grapple Pins and Bushings
Limited Function Check
The main chassis components were operational in a limited check.
Articulating Center Pins
Brake Type
Hydraulic
Brake Lines/Hoses
Park Brake
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Specialty
Grapple
Blade Condition
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | May 01, 2026 |
| Silicon | 0.91 PPM |
| Tin | 4.4 PPM |
| Silver | 0 PPM |
| Aluminum | 2.7 PPM |
| Chromium | 2.04 PPM |
| Lead | 7.41 PPM |
| Copper | 18.03 PPM |
| Nickel | 0.2 PPM |
| Iron | 35.05 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.