76 Photos
2004 AM General M1097A2 HMMWV 2 Door Soft Top w/Truck Body
Located
Sisters, OR
Sisters, OR
Usage
9,898 mi
9,898 mi
Serial number
211210
211210
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15493563
In yard
No
Features
Air Conditioning, 6.5 L Diesel Engine, Automatic Transmission, 4x4, Winch, 38x12.50R17 Tires
General Appearance
Serial Number / VIN
211210
Paint
Sheet Metal Condition
Mirrors
Exterior Lights
Operational
Control Station
Glass Condition
Windshield is chipped
Seating
Seat Belts
Operational
Steering Control
Drivetrain Controls
Master Cylinder/Brake Control
Park Brake
Stopped the vehicle while rolling
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Odometer
9898 mi-No guarantees as to actual hours/miles; we can only report what can be visually observed.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Emission Certification Label
Oil Pump/Tach Drive (behind doghouse cover)
A/C Compressor
Operational
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Fuel System
Operational
Exhaust System
Radiator
Engine - Right Side
Engine - Left Side
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Operational, Seepage
Transfer Case
Operational
Steer Axle
Rear Drive Axle
Limited Function Check
The drivetrain was operational.
Chassis
Steering Linkage
Frame Condition
Limited Function Check
The main chassis components functioned during a limited check.
Tire Condition
Wheel Condition
Wheel Studs, Nuts, Lugs
Winch
Operational, Make: Sherpa
Oil Sample Analysis
Oil Sample Analysis
| engine | transmission | |
|---|---|---|
| date of analysis | Jul 14, 2026 | Jul 14, 2026 |
| Silicon | 6.62 PPM | 14.22 PPM |
| Tin | 1.7 PPM | 1.56 PPM |
| Silver | 0 PPM | 0.05 PPM |
| Aluminum | 0.47 PPM | 3.15 PPM |
| Chromium | 1.81 PPM | 0 PPM |
| Lead | 4.02 PPM | 16.03 PPM |
| Copper | 12 PPM | 20.07 PPM |
| Nickel | 1.11 PPM | 0 PPM |
| Iron | 26.13 PPM | 25.41 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.