



68 Photos
Located
Waupun, WI
Waupun, WI
Usage
92,729 mi
92,729 mi
Serial number
1HTMMAAN04H617351
1HTMMAAN04H617351
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15501882
In yard
No
Features
International 6 Cylinder 7.6 L Diesel Engine, 10442 Engine hrs, Cruise Control, 6-Speed Manual Transmission, Differential Lock, 12000 lb Front Axle, 21000 lb Rears, 33000 lb GVWR, 11R22.5, Spring Suspension, 187 in Wheelbase, PTO, 500 lb Capacity, Rear Mounted, Articulated Boom, Utility Body, Boom Tip Mounted Winch, A-Outriggers, Rear Outriggers, 15 ft x 96 in Bed, Pintle Hitch














Serial Number / VIN
1HTMMAAN04H617351
Frame Stamp Serial Number/VIN Photo
Hour Meter / Odometer
92729 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Motor Vehicle Safety Standards Label
Yes
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Steer Axle
Rear Axle









Emissions Information
US EPA Label not legible
Emission Label
Blow-by (subjective visual observation)
Minor
Starter
Operational
Air Compressor
Operational
Fuel System
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.














Engine Hours
10442 Engine hrs
Mirrors
Window Controls
Both Manual
Seats/armrests
Ripped seat
Seat Belts
Operational
Steering Control
Horn
Electric horn operational
Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational, Check electric system light stays on light stays on
Gauges
Operational
Gear Selector
Brake Control
Operational
Engine Brake
Not operationally checked
Clutch
Engages
PTO Control
Air engaged, Operational
ECM Miles
92730 ECM mi
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.





Transmission
Operational
Drive Shaft
Power Take Off
Operational, Air operated
Steer Axle
Rear Drive Axle
Limited Function Check
The drivetrain was operational.









Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulic)
Dry rotted hoses
Boom Lift Cylinder
Secondary Boom Cylinder
Stabilizer Cylinders
Cylinders
Limited Function Check
The hydraulic system was operational, except as noted. Hydraulic oil pouring out of the boom front, when raising and lowering.

















Bed Body
Support Frame
Limited Function Check
The main chassis components were operational in a limited check.
Tool / Work Box
Painted to match body, Toolbox handle is damaged
Steering Linkage
Brake Type
Air brakes
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Rusty
Suspension Bushings
External Electrical / Air Connections
Not operationally checked
Frame Condition
Wheel Condition
Wheel Studs
Dielectric Certification
There is a Dielectric Certification label with an expiration date of 2008
Turntable Bearing
Boom Condition
Work Bucket
Hydraulic Controls
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.