



81 Photos
Located
Central Point, OR
Central Point, OR
Usage
3,936 hrs
3,936 hrs
Serial number
402609
402609
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15419649
In yard
No
Features
1999 US EPA Label, John Deere 4045TF250A 4 Cylinder 4.5 L Diesel Engine, 13 ft x 6 ft Belt Feeder w/Hydraulic Raise Grizzly Kolberg-Pioneer 2D-6012 12 ft x 4 ft 7 in Double Deck Screen, 35 in Wide Feed Conveyor, 47 in Wide Under Screen Conveyor, 23 in Wide Left Discharge Conveyor, 23 in Wide Right Discharge Conveyor, T/A Carrier, Hydraulic Leveling






Serial Number / VIN
402609
Hour Meter / Odometer
3936 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.








Gauges
Operational
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.







Emissions Status
Other 1999 US EPA Label
Emission Certification Label
US EPA certification label
Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
The engine started and ran.









Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Conveyor Cylinders
Limited Function Check
The hydraulic system was operational. Grizzly bar cylinders did not function, Hose leaking.
























Feed Hopper
Length @ top: 6 ft, Width @ top: 13 ft, Width between grizzly bars: 5.5 in, Dented
Feed Conveyor Condition
42 in wide feed belt
Feed Conveyor Frame
Feed Conveyor Drive Motor
Operational
Feed Conveyor Rollers
Feed Conveyor Head and Tail Pulley
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Operational
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Screen Deck
Number of decks: 2
Chute Condition



























Axle Condition
Trailer Brakes
Air, Not operationally checked
Brake Lines/Hoses
Not operationally checked
Limited Function Check
The main chassis components could not be operated.
Tire Size
All of the tires are the same size, 11R22.5 Front tires
Tire Condition
Dented left front outer wheel
Tread Depth
LRI 12 /32", LRO 10 /32", RRI 12 /32", RRO 11 /32", LFI 10 /32", LFO 12 /32", RFI 12 /32", RFO 17 /32"
Wheel Condition
Left front outer wheel dented
Wheel Studs
Tongue/ Hitch Condition
Dented 5th wheel plate
Power Receptacle Functional
Not operationally checked
Lights/Wiring Condition
Not operationally checked
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Bent left leg
Stabilizer Jacks
Number of jacks 2, Hydraulic, The stabilizers are operational
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jun 29, 2026 |
| Silicon | 0 PPM |
| Tin | 0 PPM |
| Silver | 0 PPM |
| Aluminum | 0.09 PPM |
| Chromium | 0.08 PPM |
| Lead | 1.66 PPM |
| Copper | 0 PPM |
| Nickel | 0.12 PPM |
| Iron | 3.38 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.