



131 Photos
Located
Wapato, WA
Wapato, WA
Usage
4,215 hrs
4,215 hrs
Serial number
DAC0500065
DAC0500065
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#13646888
In yard
No
Features
Straight Travel Pedal, 13 ft 1 in Stick, 30 in Triple Grouser Track Shoes, 39 in Digging Bucket

























Serial Number / VIN
DAC0500065
CE Mark
No CE mark found
Hour Meter / Odometer
4215 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational

Travel Alarm
Missing
Horn
Missing
Seat Belts
Inoperable
Safety Lock Out/Stop
Missing
Swing Brake
Operational, Swing brake is weak
Current Safety Manual
Current Operator/Maintenance Manual












Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Viewing window is very cloudy and difficult to see through
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.














Engine
No US EPA Label Present
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Leaking from bottom hose connection, Appears to have been cut around the shroud to make fit and function
Oil Leaks
Oil residue around oil pan, Appears to have a small leak
Fuel Leaks
No dripping leaks
Cooling System Leaks
Radiator, Radiator hose
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.




Left Drive Motor
Right Drive Motor
Left Final Drive
Right Final Drive
Limited Function Check
The drivetrain was operational.




















Pumps (Hydraulics)
Hydraulic pump access panel is damaged and does not open
Valves
Hydraulic Tank
Hoses (Hydraulics)
Hoses are beginning to crack and split
Swing Motor
Hydraulic Center Swivel
Boom Lift Cylinder(s)
Dripping leak on the left cylinder
Stick Cylinder
Bucket Cylinder
Dripping leak, Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational.




















Boom Condition
Stick Condition
Weld repair
Swing Tower Pivot
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pin and Bushings Stick to Bucket
Heavy movement
Turntable Bearing
Bottom Covers
Limited Function Check
The main components were operational in a limited check.



























Left Roller Frame
Left Track Tensioner
Left Track Shoes
Left Grouser Height
21 mm
Left Track Links
Left Carrier Rollers
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Shoes
Right Grouser Height
21 mm
Right Track Links
Right Carrier Rollers
Right Track Rollers
Right Idler
Right Sprocket








Excavator Bucket Condition
Cutting Edge / Teeth / Adapters
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Sep 25, 2025 |
| Silicon | 22.77 PPM |
| Tin | 1 PPM |
| Silver | 0.04 PPM |
| Aluminum | 9.32 PPM |
| Chromium | 6.21 PPM |
| Lead | 5.01 PPM |
| Copper | 6.14 PPM |
| Nickel | 0.48 PPM |
| Iron | 58.54 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.