96 Photos
Boonville, MO
8,950 hrs
GS19065W
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#13056689
In yard
No
Year
1977
Manufacturer
Model
Asset type
Serial number or VIN
GS19065W
Features
140 ft Boom, 30 ft Fixed Jib, Auxiliary Hoist, 3rd Drum, 3 Sheave 55 ton Hook Block, 700 lb 13 ton Overhaul Ball, 40000 lb Counterweight, 36 in Track Shoes
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
GS19065W
CE Mark
No CE mark found
Hour Meter / Odometer
8950 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Steps/Ladders
Hand Rails
Glass
Safety Certification Label
There is a safety certification label with a date of 6.2020
Safety Certification Report
Safety Certification Report Not Available
Load Chart
Yes
Seat Belts
Not equipped
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Glass
Front glass cracked.
Seats/Armrests
Controls Hydraulic or Air
Load Charts
Chart book in cab
Oil Pressure
The gauge registers in the operating range.
Gauges
Operational
Hoist Brakes
Heater
Inoperable
Limited Function Check
The main components are in place and operational as noted.
Engine
No US EPA Label Present
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Bent fins.
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drive Chains/Sprockets
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.
Pumps (Hydraulics)
Dripping leak
Hydraulic Motors
Dripping leak
Valves
Dripping leak
Hydraulic Tank
Dripping leak
Hoses (Hydraulic)
Leaking
Swing Motor
Main Hoist
Auxiliary Hoist
Limited Function Check
The hydraulic system was operational.
Hoist Drums
Mechanical Draw Works
Boom Drums
Hoist and Boom Clutches
Main Boom Pins
Pendant Line (Boom Tension Line)
Cable Type
Point Sheaves
Boom Point Section
Gantry/Mast
Boom Stops
Boom Length
140 ft overall length, 20 ft tip section, 20 ft base section, 2-40ft 1-20ft
JIB Length
30 ft overall length, 10 ft base section, 10 ft tip section, ( 3 ) 10 ft Center boom sections
Boom Angle Indicator
Turntable Bearing
Bottom Covers
Swing Drive
Operational
Limited Function Check
The main chassis components functioned when checked without a load.
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
40 mm
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
40 mm
Right Track Rollers
Right Idler
Right Sprocket
Jib
Disconnected 2 jibs included. 1-30ft 1-40ft
Main Load Block
Overhaul Ball
Third Drum
Not rigged.
Counterweights
Oil Sample Analysis
engine | |
---|---|
date of analysis | Mar 28, 2025 |
Silicon | 24.72 PPM |
Tin | 7.27 PPM |
Silver | 0.28 PPM |
Aluminum | 1.84 PPM |
Chromium | 5.44 PPM |
Lead | 3.93 PPM |
Copper | 25.69 PPM |
Nickel | 0.02 PPM |
Iron | 120.74 PPM |
Glycol | NEG |
Water | NEG |
Fuel | <5% |
Items must be paid in full by Tuesday, October 14, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.