Ocana, ESP

(1000mm) • volume 73l to suit 1 •2-1 •9 ton mini excavator • without Adapter • to suit MS01 • weight 95kg

(1000mm) • volume 73l to suit 1 •2-1 •9 ton mini excavator • without Adapter • to suit MS01 • weight 95kg

(800mm) • volume 58l to suit 1 •2-1 •9 ton mini excavator • without Adapter • to suit MS01 • weight 87kg

(800mm) • volume 58l to suit 1 •2-1 •9 ton mini excavator • without Adapter • to suit MS01 • weight 87kg

with 70mm Pin System • Weight 187kg • to suit 15-25 ton Excavator

to suit 7-10 ton excavator • with 50mm Pin System (Pin to Pin 292mm/ wide 232mm) • weight 285kg

to suit 7-10 ton excavator • with 50mm Pin System (Pin to Pin 292mm/ wide 232mm) • weight 265kg

with 60mm Pin System • Weight 181kg • to suit 10-15 ton Excavator

to suit 1-2 ton excavator • with 30mm Pin System (Pin to Pin 115mm/ wide 110mm) • weight 75kg

to suit 2-3 ton excavator • with 40mm Pin System (Pin to Pin 200mm/ wide 135mm) • weight 110kg

to suit 2-3 ton excavator • with 35mm Pin System (Pin to Pin 165mm/ wide 135mm) • weight 100kg

to suit 2-3 ton excavator • with 40mm Pin System (Pin to Pin 200mm/ wide 135mm) • weight 100kg

to suit 1-2 ton excavator • with 30mm Pin System (Pin to Pin 115mm/ wide 110mm) • weight 60kg

to suit 3-7 ton excavator • with 50mm Pin System (Pin to Pin 292mm/ wide 232mm) • weight 175kg

to suit 3-7 ton excavator • with 45mm Pin System (Pin to Pin 305mm/ wide 185mm) • weight 175kg

to suit 2-3 ton excavator • weight 100kg

to suit 3-7 ton excavator • weight 200kg

to suit 3-7 ton excavator • weight 110kg

to suit 7-10 ton excavator • weight 265kg

to suit 7-10 ton excavator • weight 285kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 30-38 tons. Weight: 1640 lb. Using Q345 manganese plate steel • high strength and corrosion resistance; The pin is made of 42CrMo alloy steel • with built-in oil passage • high strength and good toughness. Manufactured from high strength steel NM400. Heavy-duty base plate/ Heavy-duty teeth with teeth protector.

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from5-9 tons. Chisel Dia:75mm •weight:776lb.Includes: 1 circuit breaker • 75mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness

with 65mm Pin System • Weight 184kg • to suit 10-15 ton Excavator

to suit 1-2ton excavator • weight 60kg