Caorso, ITA

to suit 1 •5-2 •5 ton mini excavator • closing force 6 •3kN • opening width 820mm • weight 67kg Lifting power: 600 kg max. Clamp Width: 290 mm Height opened: 630 mm Non rotating

to fit 1.5-2 ton

to fit 1.5-2 ton

to suit 3-7 ton mini excavator • 600 mm blade • oil flow 40-75 l/min • weight 77 kg

63" (1600mm) with 90mm pin system (wide 351mm • pin to pin 485mm) • Attention: it is possible to change the pin system into 90/80mm or 2 x 80mm (extra PIN´s are added to the bucket) to suit 22-28 ton excavator volume (SAE) 1630 l • weight: 1395kg; Screwed tooth system: 6 pieces Distance between bars: 100 mm Quantity bars: 13 pieces Thickness of the bars: 20mm Edge protector made of HB400 two side cutters each made of HB400 Heel protection made of HB400

24" (600mm) • volume (SAE) 72l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 39kg

16" (400mm) • volume (SAE) 46l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 34kg

8" (200mm) • volume (SAE) 20l to suit 1 •2-2 •3 ton mini excavator • with MS01 • weight 26kg

to fit 1.5-2 ton

55" (1400mm) with 100/90mm pin system (wide 386mm • pin to pin 500mm) • Attention: it is possible to change the pin system into 100/100mm or 2 x 90mm (extra PIN´s are added to the bucket) to suit 28-36 ton excavator volume (SAE) 1390 l • weight: 1456kg; Screwed tooth system: 5 pieces lip protectors out of wear resistance steel NM400 double side cutters out of wear resistance steel NM400 with heel shroud out of wear resistance steel NM400 Side Plates S460 Roll sheet S355

Greasing Pins 90mm

Greasing Pins 90mm

Greasing Pins 70mm

55" (1400mm) Tilt Ditch Bucket • Digging Buckets HTL360 24" (600mm) and HTL330 12" (300mm) to suit 2 •8-3 •8 ton mini excavator with MS03

1700 mm Max Lift Height

55" (1400mm) Tilt Ditch Bucket • to suit 2 •9-3 •8 ton mini excavator with MS03

55" (1400mm) Tilt Ditch Bucket • to suit 2 •9-3 •8 ton mini excavator with MS03

47" (1200mm) Tilt Ditch Bucket • to suit 2 •2-2 •8 ton mini excavator with MS03

47" (1200mm) Tilt Ditch Bucket • to suit 2 •2-2 •8 ton mini excavator with MS03

to fit Kubota U55-4 • 1800 mm

to fit Komatsu PW110

Quick Coupler Bracket

auger • 2 bkts to fit JPC Excavator

auger • 2 bkts to fit JPC Excavator

auger • 2 bkts to fit JPC Excavator

hammer • bucket 200 • bucket 800 to fit to JPC

hammer • bucket 200 • bucket 800 to fit to JPC

hammer • bucket 200 • bucket 800 to fit to JPC