Filters
Showing 0-60 of 95 results
Timed auction
(Day 2 of 3)
Timed auction
(Day 2 of 3)
Timed auction
(Day 2 of 2)
Timed auction
(Day 2 of 2)
Timed auction
Timed auction
(Day 3 of 3)
Timed auction
(Day 3 of 3)
2021 Maschio Gaspardo L115 1150 mm 3-Point Rotary Tiller (Unused)
St Aubin Sur Gaillon, HN, FRA
skids • single speed • PTO shaft
Timed auction
(Day 1 of 3)
2021 Maschio Gaspardo C205 2050 mm 3-Point Rotary Tiller (Unused)
St Aubin Sur Gaillon, HN, FRA
skids • multispeed • PTO shaft
Timed auction
(Day 1 of 3)
2021 Maschio Gaspardo U 230 2300 mm 3-Point Rotary Tiller (Unused)
St Aubin Sur Gaillon, HN, FRA
skids • multispeed • PTO shaft •
Timed auction
(Day 1 of 3)
Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 140-174-215-266 • Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) • Heavy-duty rotor hub • Side gear drive in oil bath • Universal three point hitch • Cat I II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards) • Long multi-bends rear levelling doors with down-pressure double springs • Pair of skids • Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) • New flank for deeper tillage (B-super model only) • Hardened-steel antiwear skids (B-super model only)
Timed auction
(Day 3 of 3)
2016 Sicma SPR260 100 in 3-Point Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system
Timed auction
(Day 3 of 3)
Sicma SPR235 Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system
Timed auction
(Day 3 of 3)
2022 Maschio H205 80 in Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2016 Sicma RG-255 100 in 3-Point Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned inwards) •2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat II and III • 3 point hitch •Box frame •PTO shaft size 8 (Eurocardan) with slip clutch •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system
Timed auction
(Day 3 of 3)
2021 Maschio Fresa H185 Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2021 Maschio H185 74 in Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2016 Maschio U205 82 in Rotary Tiller (Unused)
Nisku, AB, CAN
540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2016 Maschio U205 82 in Rotary Tiller (Unused)
Nisku, AB, CAN
540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •
Timed auction
(Day 3 of 3)
2016 Maschio U205 82 in Rotary Tiller (Unused)
Nisku, AB, CAN
540 PTO • Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2020 Maschio U180 72 in Rotary Tiller (Unused)
Nisku, AB, CAN
Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
Sicma RG-255 100 in 3-Point Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) • Standard rotor (with end blades turned inwards) • 2-speeds (@540 rpm) or 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator • Side gear drive in oil bath with sight glass • Lower 3rd point hitches with swinging movement • Adjustable side skids to control the desired working depth • Parking stand • Cat II and III • 3 point hitch • Box frame • PTO shaft size 8 (Eurocardan) with slip clutch • "Long life" HD seal provided inside the rotor's bearings • Polyester powder coating system
Timed auction
(Day 3 of 3)
2022 Maschio H205 81 in Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolution 215 rpm •PTO shaft with slip clutch(1-3/8" Z6 tractor side yoke) •Side gears drive in oil bath •Universal three point hitch: Cat I + II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2017 Sicma SPR 210 Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) + 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system
Timed auction
(Day 3 of 3)
2015 Maschio U230 92 in 3-Point Rotary Tiller (Unused)
Nisku, AB, CAN
Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 178-201-227-256 •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
2014 Maschio A 160 65 in Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I+II •Centre + offset mounting is standard •6 blades per flange
Timed auction
(Day 3 of 3)
Sicma RD 185 72 in Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitch adjustable will offset to the right side •Adjustable side skids to control the desired working depth •Parking stand •Cat 1and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life" HD seal provided inside the rotor
Timed auction
(Day 3 of 3)
2014 Sicma RM 235 Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings
Timed auction
(Day 3 of 3)
2018 Sicma RM 235 Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings
Timed auction
(Day 3 of 3)
2018 Sicma RM 235 Rotary Tiller (Unused)
Nisku, AB, CAN
6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •Single or 4-speed gearbox made by SICMA with conical roller bearings • and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with adjustable width •Adjustable side skids to control the desired working depth •Parking stand •Cat 1 and 2 • 3 point hitch •PTO shaft size 6 (Eurocardan) with Slip Clutch protection •Polyester powder coating system •Box frame •"Long life"HD seal provided inside the rotor's bearings
Timed auction
(Day 3 of 3)
Sicma SPR235 Rotary Tiller (Unused)
Nisku, AB, CAN
540 PTO • 6 curved blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •4-speeds (@540 rpm) 2-speeds (@1000 rpm) gearbox made by SICMA with conical roller bearings and oil level indicator •Side gear drive in oil bath with sight glass •Lower 3rd point hitches with swinging movement •Adjustable side skids to control the desired working depth •Parking stand •Cat 2 • 3 point hitch •PTO shaft size 8 (Eurocardan) with Slip Clutch protection •Box frame •"Long life" HD seal provided inside the rotor's bearings •Polyester powder coating system
Timed auction
(Day 3 of 3)
2018 Sicma ZLL150 60 in Rotary Tiller (Unused)
Nisku, AB, CAN
6 "L" blades per flange mounted in spiral line (for normal soils) •Standard rotor (with end blades turned outwards) •1-speed gearbox made by SICMA with conical roller bearings •Side chain drive in oil bath with automatic chain tensioner and sight glass •Lower 3rd point hitches with adjustable width • will offset to the right •Adjustable side skids to determine the desired working depth •Parking stand •Cat I • 3 point hitch •PTO shaft size 4 (Eurocardan) with Slip Clutch protection •Polyester powder coating system
Timed auction
(Day 3 of 3)
Maschio C300 120 in Rotary Tiller (Unused)
Nisku, AB, CAN
540/1000 rpm PTO gearbox •Rotor revolutions 540 rpm PTO (4 speed): 175-214-262-143 •Rotor revolutions 1000 rpm PTO (2 speed): 324-356 •Slip clutch PTO shaft: 1-3/8" Z6 tractor side yoke with 540 rpm PTO 1-3/8" Z21 tractor side yoke with 1000 rpm PTO •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat II •Offset front bar hitches •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids
Timed auction
(Day 3 of 3)
2021 Maschio W165 Rotary Tiller (Unused)
Nisku, AB, CAN
Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades
Timed auction
(Day 3 of 3)
2021 Maschio W165 Rotary Tiller (Unused)
Nisku, AB, CAN
Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades
Timed auction
(Day 3 of 3)
2021 Maschio W165 Rotary Tiller (Unused)
Nisku, AB, CAN
Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades
Timed auction
(Day 3 of 3)
2021 Maschio W165 Rotary Tiller (Unused)
Nisku, AB, CAN
Cat I • 3 pt. hitch •Single speed gearbox with 540 rpm PTO •Side chain drive in oil bath •PTO shaft with slip clutch •6 blades per flange •Outward turning blades
Timed auction
(Day 3 of 3)
Maschio B230 8 ft Rotary Tiller (Unused)
Nisku, AB, CAN
Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only)
Timed auction
(Day 3 of 3)
Maschio Delfino 1800 66 in Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolution 290 rpm •PTO shaft with shear pin (1" 3/8 Z6 tractor side yoke) •PTO shaft with slip clutch (optional) •Leveling bar (optional) •Round blade-holders •2 blades per rotor •Strengthened 6mm housing transmission • high strength steel •Cat. I (Models 1300-1500) • Cat. II (Models 1800-2000) •3 pt hitch •Hitch will offset •Side dampened protection •Depth control by 15" cage roller with pin adjustment
Timed auction
(Day 3 of 3)
Maschio Pantera 570 Rotary Tiller (Unused)
Nisku, AB, CAN
PTO shaft central direct •Heavy duty side PTO shaft with cam clutch •Double side transmission with oil bath gears •Heavy duty barrel type bearings •Universal three point hitch • Cat. III •Swinging/rigid front bar hitches •6 blades per flange (side blades are always mounted inwards) •Shield spring adjusters •Hydraulic roller side adjusters •2 2 hydraulic adjuster for folding units lifting •Central eradicator •Small central share between the rollers •Transport width (folded): 8 1/4 ft. •Rear lights for transport •Double rear bonnet
Timed auction
(Day 3 of 3)
Maschio A 180C Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange
Timed auction
(Day 3 of 3)
Maschio A 160C Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange
Timed auction
(Day 3 of 3)
Maschio A 180C Rotary Tiller (Unused)
Nisku, AB, CAN
Single speed gearbox with 540 rpm PTO •Rotor revolutions: 208 rpm •PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) •Side chain drive in oil bath •Universal three point hitch: Cat I II •Centre offset mounting is standard •6 blades per flange
Timed auction
(Day 3 of 3)
Maschio B155 63 in Rotary Tiller (Unused)
Nisku, AB, CAN
Multispeed Gearbox 540 rpm PTO •Rotor revolutions (4 speed): 140-174-215-266 •Slip clutch PTO shaft (1-3/8" Z6 tractor side yoke) •Heavy-duty rotor hub •Side gear drive in oil bath •Universal three point hitch • Cat I+II •Will offset 8" to the right •6 blades per flange (side blades are always mounted inwards) •Long multi-bends rear levelling doors with down-pressure double springs •Pair of skids •Oversize rotor Ø 22 in. with high strength steel flanges (B-super model only) •New flank for deeper tillage (B-super model only) •Hardened-steel antiwear skids (B-super model only)
Timed auction
(Day 3 of 3)
Maschio U180 73 in 3-Point Rotary Tiller (Unused)
Nisku, AB, CAN
Multispeed Gearbox 540 rpm PTO • Rotor revolutions (4 speed): 178-201-227-256 • PTO shaft with slip clutch (1-3/8" Z6 tractor side yoke) • Side gear drive in oil bath • Universal three point hitch • Cat I+II • Will offset 8" to the right • 6 blades per flange (side blades are always mounted inwards)
Timed auction
(Day 3 of 3)
Timed auction
(Day 3 of 3)
1-60 of 95