Demolition and Recycling Attachments For Sale

ALL 32-42 Ton Excavators - With AUTO - LUBRICATION Pre-Disposition. BOX TYPE - All New TERAN Hydraulic Hammers are supplied with: 2 Chisels "Moil Point 'M' Type" • 2 Hoses • 1 Set of N2 Nitrogen Charging Kit with N2 Bottle and Pressure Gauge • 1 Spare Seal Kit • Tool Box with Maintenance Tools and Operations Manual. (DB LINKAGE 100/90)

114 mm Diameter Pins • 527 mm Center of Pin Boss to Center of Pin Boss • 432 mm Inside to Inside Pin Boss Spacing

355 mm Center of Pin Boss to Center of Pin Boss • 260 mm Inside to Inside Pin Boss Spacing

Weld-on Thumb 30" for CAT 320/325 and 20 - 25 TON EXCAVATORS

90 mm Diameter Pins • 440 mm Center of Pin Boss to Center of Pin Boss • 330 mm Inside to Inside Pin Boss Spacing

80.5 mm Diameter Pins • 407 mm Center of Pin Boss to Center of Pin Boss • 305 mm Inside to Inside Pin Boss Spacing

65 mm Diameter Pins • 470 mm Center of Pin Boss to Center of Pin Boss • 380 mm Inside to Inside Pin Boss Spacing

101.6 mm Diameter Pins • 584.2 mm Center of Pin Boss to Center of Pin Boss • 419 mm Inside to Inside Pin Boss Spacing

73 mm Stick Pin Diameter • 32 mm Link Pin Diameter • 203 mm Inside to Inside Pin Boss Spacing

ALL 10-14 TON EXCAVATORS - WITH AUTO - LUBRICATION PRE-DISPOSITION

70 mm Pins

FITS TO ALL 18 TO 22 TON MACHINES-WIDTH: 39.5 INCHES - GAP OPENING: 84.5 INCHES - HARDOX 500 STEEL WITH REPLACEABLE CUTTING EDGE

Fits 26-34 ton (57.3K-75K lbs) Excavator

to fit CAT320 •for 20-30 ton excavator • two hoses

to suit 24-35 ton excavator • Rotation 360° • Open/close operating pressure: 300-340 bar • Open/close oil flow rate: 150-200 l/min • weight 2639kg

to suit 18-26 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 120-180 l/min • weight 1934kg

to fit 16 - 40 ton excavators

to suit 18-30 ton excavator • hydraulic flow range 130-150 L/min • Copy of declaration of confirmity available • 1600 kg

to suit 16-22 ton excavator • Rotation 360° • Open/close operating pressure: 280-320 bar • Open/close oil flow rate: 70-120 l/min • weight 1325kg

to fit 12 - 35 ton excavators

to fit 15 - 35 ton excavators

to suit 12-18 ton excavator • Rotation 360° • Open/close operating pressure: 270-300 bar • Open/close oil flow rate: 70-120 l/min • weight 1135kg

to fit 15 - 32 ton excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 15-24 tons. Max Opening: 33 in. Max Cuntting Force: 107 tons .Weight: 2888 lb. Made of Swedish Hardox 500 steel • lightweight and wear-resistant; The pin is made of 42CrMo alloy steel • with bullt-in oll passage • high strength and good toughness;

to suit 15-24 ton excavator • hydraulic flow range 90-120 L/min •Copy of declaration of confirmity available • 1300 kg

to fit 9 - 25 ton excavators

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator ton range from 19-26 tons. Hose Dia: 1 in. Weight: 3034 lb. Chisel Dia: 135 mm .Includes: 1 circuit breaker • 135mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shell is lengthened to enhance its firmness

to suit 8-12 ton excavator • Rotation 360° • Open/close operating pressure: 250-280 bar • Open/close oil flow rate: 50-70 l/min • weight 596kg

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shellis lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 19-26 tons. Hose Dia: l in. Chisel Dia: 140 mm. Weight: 3968 lb .Includes: 1 circuit breaker • 140mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools。The reinforcement plate of the hammer shellis lengthened to enhance its firmness

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 28-40 tons. Weight: 6724lb.Chisel Dia: 155 mm. Includes: 1 circuit breaker • 155mm chisel • 2 oil hoses • 1 set of nitrogen cylinder nitrogen production device • 1 pressure gauge • 1 set of toolbox and necessary maintenance tools. The reinforcement plate of the hammer shellis lengthened to enhance its firmness.

to fit 15 - 32 ton excavators

to suit 25-40 ton excavator • hydraulic flow range 120-180 L/min • Copy of declaration of confirmity available • 2000 kg

silence type • for 25-37 ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

Suitable for KOMATSU/HITACHI/CAT/VOLVO/DAEWOO/John Deere excavator tonne range from 20-28 tons. Max Opening: 19 in • Weight: 2877 lb. Made of Swedish Hardox Hituf steel • good toughness and wear resistance: The pin is made of 42CrMo alloy steel with high strength and toughness.

to suit 12-20 ton Excavator • Copy of declaration of confirmity available • Weight 1005 kg

to fit 8 - 16 ton excavators

Fits 15- 32 Ton Excavators

to fit 6 - 14 ton excavators

to fit 4 - 12 ton excavators

to fit 6 - 14 ton excavators

silence type • for 20-30ton excavator • all new TOFT hydraulic breaker are supplied with two Moil-type chisel • two hoses • one Set Of N2 Nitrogen Charging Kit With N2 Bottle And Pressure Gauge • Toil Box With Maintenance Tools And Operations Manual

to fit CAT315 •for 10-18 ton excavator • two hoses

to suit 6-12 ton Excavator • Copy of declaration of confirmity available • Weight 430 kg

to suit 6-12 ton Excavator • Copy of declaration of confirmity available • Weight 460 kg

to fit 20-30 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 70-90 l/min • opening width 2100mm • weight 1395kg

to fit 9 - 19 ton excavators

to fit 20-28 ton mini excavator • operating pressure open/closed: 250-280 bar • min. oil volume open/closed: 60-80 l/min • opening width 1950mm • weight 1275kg

to fit 16-24 ton mini excavator • operating pressure open/closed: 220-260 bar • min. oil volume open/closed: 60-80 l/min • opening width 1850mm • weight 820kg

to fit 7 •5-10 ton mini excavator • operating pressure open/closed: 200-240 bar • min. oil volume open/closed: 25-35 l/min • opening width 1550mm • weight 429kg