



52 Photos
Located
Farmington, NM
Farmington, NM
Usage
2,454 hrs
2,454 hrs
Loading...
ID number
#15549551
In yard
No
Features
Cat 4 Cylinder Diesel Engine, 10 ft x 5 ft Trommel Screen, 46 in Wide Feed Conveyor, 25 in Wide End Discharge Conveyor, Radio Remote Control, S/A Carrier, Spring Suspension, Hydraulic Leveling





Serial Number / VIN
No serial number or manufacturer’s identifying number found. This unit may be difficult to export.
CE Mark
No CE mark found
Hour Meter / Odometer
2454 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.





Gauges
Operational
Engine Controls
Crusher/Screen Controls
Limited Function Check
The main components are in place and operational as noted.






Blow by @ idle (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check (Engine)
The engine started and ran.











Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Conveyor Cylinders
Stabilizer Jack Cylinders
Limited Function Check
The hydraulic system was operational.














Feed Hopper
Length @ top: 11, Width @ top: 5, Grizzly length: 11
Crusher Base Frame
Feed Conveyor Condition
46 in wide feed belt
Feed Conveyor Frame
Feed Conveyor Drive Motor
Operational
Feed Conveyor Head and Tail Pulley
Discharge Conveyor Condition
Discharge Conveyor Drive Motor
Discharge Conveyor Rollers
Discharge Conveyor Head and Tail Pulley
Screen Deck
Screen Cloth
Chute Condition











Axle Condition
Trailer Brakes
Air, Not operationally checked
Brake Lines/Hoses
Not operationally checked
Limited Function Check
The main chassis components could not be operated.
Tire Size
235/75R17.5 Front tires
Tire Condition
Tread Depth
LRI 13 /32", LRO 14 /32", RRI 15 /32", RRO 15 /32"
Wheel Condition
Wheel Studs
Springs/Hangers Condition
Tongue/ Hitch Condition
Power Receptacle Functional
Not operationally checked
Lights/Wiring Condition
Not operationally checked
Marker Lights Functional
No
Brake Lights Functional
Not operationally checked
Turn Signals Functional
Not operationally checked
License Plate Light Functional
No
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Items must be paid in full by Thursday, August 13, 2026. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.