




68 Photos
Griffith, IN
2738479
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12915494
In yard
No
Manufacturer
Model
Asset type
Serial number or VIN
2738479
Features
5 ft x 12 ft Belt Feeder w/Grizzly 6 ft x 4 ft Double Deck Screen, 24 in Wide Feed Conveyor, S/A Carrier







Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
2738479



Crusher/Screen Controls
Not operationally checked
Limited Function Check
Electric not hooked up cannot operationally check




Electric Motors
Manufacture brand WEG, Horsepower: 30, Not hooked up. Not operationally checked
Disconnect Switch
Not operationally checked
Cables and Connections














Pumps (Hydraulics)
Not operationally checked visually looks ok
Hydraulic Motors
Not operationally checked
Valves
Dripping leak, Not operationally checked. Drip leak at feeder control valve.
Hydraulic Tank
Sight glass leak
Hoses
Fluid seepage near valves
Conveyor Cylinders
Not operationally checked visually looks ok
Limited Function Check
The hydraulic system could not be operationally checked.






























Feed Hopper
Length @ top: 13ft 4in, Width @ top: 6ft, Grizzly length: 6ft, Width between grizzly bars: 6in
Feed Conveyor Condition
24 in wide feed belt
Feed Conveyor Frame
Feed Conveyor Drive Motor
Not operationally checked
Feed Conveyor Rollers
Feed Conveyor Head and Tail Pulley
Wear
Screen Deck
Number of decks: 2, End tension bottom deck, Some Wear
Deck Frames / Wear Bars
Wear
Screen Cloth
Heavy wear
Chute Condition
Chutes have been lined










Axle Condition
Limited Function Check
The main chassis components could not be operated.
Tire Size
235/85r16 Front tires, LF kenda radial, RF Ironman
Tire Condition
Seller will have tires checked before pickup. Right side flat
Wheel Condition
Wheel Studs
Tongue/ Hitch Condition
No visible damage
Frame Rails/ Main Beams Condition
Bent metal
Landing Gear / Tongue Jack
Not operationally checked. Manual adjustment
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.