




108 Photos
Located
Franklin, NC
Franklin, NC
Usage
3,722 hrs
3,722 hrs
Serial number
FTX600105FN
FTX600105FN
Loading...
An inspection report will be available soon. Please check back later.
ID number
#14820051
In yard
No
Manufacturer
Model
Asset type
Serial number or VIN
FTX600105FN
Features
Enclosed Cab, Air Conditioner, Joystick Steering, 36 in Track Belts, Fecon 7 ft, Mulcher, Winch
Notes
COMES WITH IRONCLAD ASSURANCE. SUBJECT TO NORTH CAROLINA SALES TAX.



















Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
FTX600105FN
CE Mark
No CE mark found
Hour Meter / Odometer
3722.2 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Scratches on glass
Exterior Lights
Some not operational, 1 non working, 2 missing in front. Working light lens is broken. lights are not operational

Travel Alarm
Operational
Horn
Inoperable
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual














Seats/Armrests
Mirrors
Steering Controls
When turning right, machine continued to pull right for a few seconds after releasing the control lever to center.
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Inoperable, Fan does not work
Heater
Inoperable, Fan doesn’t work
Limited Function Check
The main components are in place and operational as noted.









Engine
No US EPA Label Present
A/C Compressor
Could not see clutch while running
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Muffler rusted, broken
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine panel difficult to open, needed to use pry bar
Limited Function Check
The engine started and ran.




Drive Motors
When turning right machine continued to pull right fit a few seconds after control returned to center
Final Drives
Limited Function Check
The drivetrain was operational.
























Pumps (Hydraulics)
Dripping leak, Wet with oil all around pump area. Dripping leak at sensor on right side of pump
Valves
Dripping leak
Hydraulic Tank
Low fluid level
Hoses (Hydraulics)
Covering worn off
Loader Lift Cylinders
Dripping leak on the right cylinder, Cylinders drift down immediately. Wet with oil around cylinders, can’t see rod with boot on left side. Right side is dripping.
Bucket Tilt Cylinders
Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational.














Roller Frames
Bent step on right side
Grouser Height Measurement
Left side: 32 mm, Right side: 32 mm
Track Belt Condition
No visible damage
Track Tensioners
No visible damage
Carrier Rollers
Front Idler Wear
Track Rollers
Sprockets
Missing bolts














Frame Condition
Crack at right front behind lift cylinder. Appears to have been repaired previously.
Belly Pans
Missing pan under engine, hydraulics. Small pan in rear is laying in cab.
Lift Arm Condition
Plate bent on left side
Chassis to Arm Pins
Heavy movement
Limited Function Check
The main chassis components were operational in a limited check.









Mulcher
Worn teeth
Items must be paid in full by Tuesday, March 31, 2026. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.