



114 Photos
Located
Odessa, MO
Odessa, MO
Usage
1,775 hrs
1,775 hrs
Serial number
C8901012
C8901012
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15516260
In yard
No
Features
1239 Separator Hours Showing, Air Conditioner, Air Ride Seat, Hydrostatic Drive, Reverser, Variable Speed Reel, Auto Header Height Control, Fore & Aft, Harvest Monitor System, Yield & Moisture Sensor, Rear View Camera, Auger Camera, 2022 US EPA Label, Requires Diesel Exhaust Fluid, Rock Trap, Twin Rotor, 29 ft Auger, Pivoting Spout, HP Fixed Speed with Lateral Tilt Lateral Tilt Feederhouse, Power Folding Grain Tank Extensions, Side Hill, Integrated Chopper, LED Lights, 710/65R30 Rear Tires












Serial Number / VIN
C8901012
CE Mark
No CE mark found
Hour Meter / Odometer
1775 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Not operational, All lights are not operational, Missing control knob

Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
















Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational, Maintenance/Service light stays on, Generator voltage too low, Exhaust gas after treatment defective light stays on
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted. Several components couldn’t be operationally checked because some belts are off of pulleys and missing components.









Engine
2022 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.



Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.








Steering Linkage
Steering Wheel Play
Brake Type
Hydraulic
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Automatic Lube System
Yes
Left Rear Tire
Right Rear Tire
Wheel Condition
Wheel Studs









Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.












Header Electrical Connection
Laying loose on top of the feeder house.
Feed Chain and Sprockets
Not operationally checked.
Feed Chain Slats
Feed Floor Chain Wear Strips
Missing with wooden slates in place
Header Latches
Missing
Stone Trap
Full of debris
Feed Accelerator
Not operationally checked








Concave Condition
Front Rotor Bearing
Rasp Bars
Cleaning Fan
Shaker Shoe Frame and Drive
Chaffer and Sieve







Tailings Elevator Housing/Paddles
Lower Return Auger
Upper Return Auger
(Clean Grain) Elevator Chains/Sprockets
(Clean Grain) Elevator Housing/Paddles
Grain Tank
Grain Tank Unloading Augers








Feeder House Drive
Rotor Drive Gear Box
Electro-Magnetic Clutches
Drive Belts/Pulleys, Chains and Sprockets
Slack on drive belt, Belt off of pulleys
Safety Shields and Inspection Panels
Missing safety shields







Grain Loss Monitor
Straw Chopper
Straw Spreader














Roller Frames
Grouser Height Measurement
Left side: 58 mm, Right side: 59 mm
Track Belt Condition
Normal wear
Rubber Belt Drive Lugs
No visible damage
Track Tensioners
No visible damage
Front Idler Wear
Rear idler wear
Track Rollers
Sprockets
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 16, 2026 |
| Silicon | 0.34 PPM |
| Tin | 0.7 PPM |
| Silver | 0 PPM |
| Aluminum | 1.55 PPM |
| Chromium | 0.54 PPM |
| Lead | 0.91 PPM |
| Copper | 10.4 PPM |
| Nickel | 0.28 PPM |
| Iron | 8.02 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.