




70 Photos
Grand rapids, MI
2,992 hrs
CATCB34BKXB401101
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12906393
In yard
No
Year
2021
Manufacturer
Model
Asset type
Serial number or VIN
CATCB34BKXB401101
Features
Open Operator Station, 2019 US EPA Label, Cat C2.2 4 Cylinder 2.2 L Diesel Engine, 51 in Compaction Width














Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CATCB34BKXB401101
Hour Meter / Odometer
2992 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Exterior Lights
Operational


Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual











Seats/Armrests
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.









Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.






Left Front Drive Motor
Left Rear Drive Motor
Right Rear Drive Motor
Right Front Drive Motor
Final Drives
Limited Function Check - Compaction
The drivetrain was operational without a load.









Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses
Drum Vibration Motors
Steering Cylinders
Limited Function Check
The hydraulic system was operational.



















Drum Condition
Padfoot / Chopper Feet Condition
Rubber Drum Isolators
Drum Scraper
Water System
Unable to test
Frame Condition
Ballast Tank
No additional weight visible
Articulating Center Pins
Park Brake
Limited Function Check (roller)
The main chassis components were operational.
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Dec 24, 2024 | Dec 24, 2024 |
| Silicon | 10.66 PPM | 7.53 PPM |
| Tin | 0 PPM | 0 PPM |
| Silver | 0 PPM | 0 PPM |
| Aluminum | 3.16 PPM | 1.06 PPM |
| Chromium | 0.65 PPM | 0.52 PPM |
| Lead | 0 PPM | 1.55 PPM |
| Copper | 0.72 PPM | 6.26 PPM |
| Nickel | 1.65 PPM | 1.61 PPM |
| Iron | 23.09 PPM | 16.16 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.