88 Photos
Russellville, AR
2,484 hrs
CAT0289DJJX906528
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12832110
In yard
No
Year
2021
Manufacturer
Model
Asset type
Serial number or VIN
CAT0289DJJX906528
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, Joystick Steering, 2021 US EPA Label, 18 in Track Belts, Hydraulic Coupler, 80 in Bucket, Counterweight Kit
Featured Photo
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT0289DJJX906528
CE Mark
No CE mark found
Hour Meter / Odometer
2484 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
2021 US EPA Label
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Loader Lift Cylinders
Heavy pin and bushing movement
Bucket Tilt Cylinders
Heavy pin and bushing movement
Limited Function Check
The hydraulic system was operational.
Frame Condition
Belly Pans
Lift Arm Condition
Chassis to Arm Pins
Heavy movement
Quick Coupler to Arms Pins
Heavy movement
Limited Function Check
The main components were operational except as noted.
Roller Frames
Grouser Height Measurement
Left side: 17 mm, Right side: 17 mm
Track Belt Condition
Normal wear
Rubber Belt Drive Lugs
No visible damage
Track Tensioners
Operational
Front Idler Wear
Rear idler wear
Track Rollers
Sprockets
Quick Coupler
Operational
Loader Bucket Condition
Loader Bucket Cutting Edge/Shanks/Teeth
Oil Sample Analysis
engine | hydraulic | |
---|---|---|
date of analysis | Jan 13, 2025 | Jan 13, 2025 |
Silicon | 3.32 PPM | 2.02 PPM |
Tin | 0 PPM | 0.26 PPM |
Silver | 0 PPM | 0 PPM |
Aluminum | 0.67 PPM | 1.94 PPM |
Chromium | 0 PPM | 0 PPM |
Lead | 0.47 PPM | 2.53 PPM |
Copper | 0.83 PPM | 12.4 PPM |
Nickel | 0.56 PPM | 0.64 PPM |
Iron | 2.24 PPM | 15.84 PPM |
Glycol | NEG | N/A |
Water | NEG | N/A |
Fuel | <5% | <5% |
Items must be paid in full by Friday, June 27, 2025. Late fees will be applied after due date.
Payment optionsSubmit your item to VeriTread and receive free, no-obligation freight quotes.
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.