119 Photos
2019 Cat 12M3 Motor Grader
Located
Waycross, GA
Waycross, GA
Usage
6,107 hrs
6,107 hrs
Serial number
CAT0012MKN9F01157
CAT0012MKN9F01157
Loading...
Detailed equipment information
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12868796
In yard
No
Year
2019
Manufacturer
Model
Asset type
Serial number or VIN
CAT0012MKN9F01157
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, Joystick Steering, Tier 4, 2018 US EPA Label, 14 ft / 4.27 m Moldboard, 14.00-24 Tires
General Appearance
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT0012MKN9F01157
CE Mark
No CE mark found
Hour Meter / Odometer
6107 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Some not operational, 2 lights are not operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Drivetrain Controls
Dash Console
Engine Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Not operationally checked
Limited Function Check
The main components are in place and operational as noted. Batteries have been replaced
Engine
Engine
2018 US EPA Label
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Recirculating system
Starter
Operational
Exhaust System
Radiator
Needs cleaning
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
Batteries have been replaced
Drivetrain
Transmission
Rear Drive Axle
Rear Tandems (Chain Drives)
Limited Function Check
The drivetrain was operational.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Articulation Cylinders
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Saddle Positioning Cylinder
Saddle Lock Pin
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Y-frame
Y-frame Pivot Trunnion
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins
Front Axle Oscillating Pin
Steering Linkage
Wheel Tilt Linkage
Limited Function Check (grader)
The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Stopped the machine while rolling
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Left Front: MaXam, Left Middle: Galaxy, Left Rear: MaXam, Right Rear: Galaxy, Right Middle: MaXam, Right Front: MaXam
Left Steer Tire
Left Rear Drive Tires
Right Rear Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs, Nuts, Lugs
Specialty
Blade Condition
Blade Cutting Edge Condition
Oil Sample Analysis
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Dec 19, 2024 | Dec 19, 2024 |
| Silicon | 16.58 PPM | 10.14 PPM |
| Tin | 0 PPM | 0 PPM |
| Silver | 0.13 PPM | 0 PPM |
| Aluminum | 13.99 PPM | 3.59 PPM |
| Chromium | 5.55 PPM | 0.65 PPM |
| Lead | 30.55 PPM | 0 PPM |
| Copper | 18.93 PPM | 3.29 PPM |
| Nickel | 1.58 PPM | 0.88 PPM |
| Iron | 246.21 PPM | 7.62 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Additional information
Terms of Bidding and Sale
Bids cannot be retracted. Everything sells "as is, where is". Read the full terms and conditions before you bid.Terms of Bidding and SaleTransaction fees
Successful buyers will be required to pay a buyer transaction fee.More detailsPayment
Items must be paid in full by Saturday, March 1, 2025. Late fees will be applied after due date.
Payment optionsNeed additional information
Contact our Event site for more information.+1(863) 420-9919Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.