



72 Photos
Located
Lufkin, TX
Lufkin, TX
Usage
9,280 hrs
9,280 hrs
Serial number
5JYKB482XJPP07603
5JYKB482XJPP07603
Loading...
ID number
#10315347
In yard
No
Notes
<br><br> **FET equal to 12% of the final sales price will be added to this item* <br><br> "No Title Available. A MSO will be provided to transfer ownership. Please check with your local licensing agency".











Serial Number / VIN
1T0437EDAHF318047
Paint
Sheet Metal (Fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Some not operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual












Seats/Armrests
Hydraulic Controls
Not working
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational, Check engine light stays on
Gauges
Operational
Hour Meter (pre-inspection)
9280 hrs
Hour Meter
9280 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Air Conditioner
Inoperable
Heater
Not operationally checked
Limited Function Check
The main components are in place and operational as noted.








Engine
No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor
Operational
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Rear of engine
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.









Pumps (Hydraulics)
Dripping leak
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Not operationally checked
Swing Motor
Hydraulic Center Swivel
Boom Lift Cylinder(s)
Stick Cylinder
Grapple Clamp Cylinders
Off
Limited Function Check
The hydraulic system could not be operationally checked.
















Grapple Condition
Off
Delimber Knives
Slasher
Not operational
Boom Condition
Stick Condition
Boom Base Pin and Bushings
Pin and Bushings Boom to Stick
Pins and Bushings Stick to Grapple
Turntable Bearing
Bottom Covers
Limited Function Check
The unit could not be started and run; several components could not be checked.
Grapple Arm Pins and Bushings
















Axle Condition
Trailer Brakes
Not operationally checked
Brake Lines/Hoses
Not operationally checked
Limited Function Check
The unit could not be started and run; several components could not be checked.
Tire Size
All of the tires are the same size, 295/75-22.5 Front tires, LF Roadone
Tire Condition
Some flat
Tongue/ Hitch Condition
Lights/Wiring Condition
Not operationally checked
Brake Lights Functional
Not operationally checked
Turn Signals Functional
Not operationally checked
Frame Rails/ Main Beams Condition
Landing Gear / Tongue Jack
Stabilizer Jacks
Number of jacks 6, Hydraulic, The stabilizers could not be operationally checked
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 25, 2023 |
| Silicon | 2.73 PPM |
| Tin | 2.13 PPM |
| Silver | 0 PPM |
| Aluminum | 3.01 PPM |
| Chromium | 1.38 PPM |
| Lead | 1.09 PPM |
| Copper | 4.98 PPM |
| Nickel | 2.96 PPM |
| Iron | 53.16 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Thursday, August 27, 2026. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.