



85 Photos
Located
Lake Orion, MI
Lake Orion, MI
Usage
1,943 hrs
1,943 hrs
Serial number
726M4021
726M4021
Loading...
ID number
#14015820
In yard
No
Features
Enclosed Cab, Air Conditioner, Joystick Steering, Rear View Camera, 2013 US EPA Label, Requires Diesel Exhaust Fluid, Fencon FGT9025H-CN00470-5 9 ft, Mulcher













Serial Number / VIN
726M4021
Hour Meter / Odometer
1943 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights
Operational
Horn
Operational
Seat Belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual




















Seats/Armrests
Mirrors
Steering Controls
Hydraulic Controls
Drivetrain Controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.














Engine
2013 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor Minor pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.



Limited Function Check
The drivetrain was operational.










Pumps (Hydraulics)
Valves
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Operational
Loader Lift Cylinders
Left lift cylinder has fluid seepage
Bucket Tilt Cylinders
Limited Function Check
The hydraulic system was operational.




















Frame Condition
Belly Pans
Left Front Tire
Left Rear Tire
Right Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Lift Arm Condition
Chassis to Arm Pins
Limited Function Check
The main chassis components were operational in a limited check.





Mulcher
Worn teeth
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 22, 2026 |
| Silicon | 0 PPM |
| Tin | 1.38 PPM |
| Silver | 0 PPM |
| Aluminum | 0.08 PPM |
| Chromium | 0.54 PPM |
| Lead | 0.59 PPM |
| Copper | 2.37 PPM |
| Nickel | 0.48 PPM |
| Iron | 10.32 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.