



63 Photos
Located
Charlotte, NC
Charlotte, NC
Usage
2,765 hrs
2,765 hrs
Serial number
N420028
N420028
Loading...
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#15016354
In yard
No
Features
2 Stage Mast, 176 in Max Lift Height, 97 in Lowered Mast Height, 48 in Forks, Side Shift, Kohler 3 Cylinder Diesel Engine











Serial Number / VIN
N420028
CE Mark
No CE mark found
Hour Meter / Odometer
2765 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Exterior Lights
Some not operational

Travel Alarm
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual










Seats/Armrests
Hydraulic Controls
Steering Control
Drivetrain Controls
Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.






Emissions Status
No US EPA Label Present
Starter
Operational
Exhaust System
Radiator
Oil Leaks
Oil Pan
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.







Inching Brake
Operational
Front Drive Axle
Rear Drive Axle
Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.















Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Steering Cylinders
Mast Lift Cylinders
Mast Tilt Cylinders
Limited Function Check
The hydraulic system was operational.













Mast/Boom Condition
Chain / Tensioners
Carriage Rollers and Guides
Load Back Rest
Side Shift
Forks
Steering Linkage
Frame Condition
Master Cylinder/Brake Control
Park Brake
Inoperable
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Left Front Tire
Left Rear Tire
Right Front Tire
Wheel Condition
Wheel Studs
Oil Sample Analysis
| engine | hydraulic | |
|---|---|---|
| date of analysis | Apr 08, 2026 | Apr 08, 2026 |
| Silicon | 0 PPM | 0 PPM |
| Tin | 0.15 PPM | 0.03 PPM |
| Silver | 0 PPM | 0.03 PPM |
| Aluminum | 2 PPM | 0.02 PPM |
| Chromium | 0.73 PPM | 2.32 PPM |
| Lead | 0.83 PPM | 2.03 PPM |
| Copper | 1.65 PPM | 1.14 PPM |
| Nickel | 0.16 PPM | 0.06 PPM |
| Iron | 18.49 PPM | 59.38 PPM |
| Glycol | NEG | N/A |
| Water | NEG | N/A |
| Fuel | <5% | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.