



83 Photos
Located
Kansas City, KS
Kansas City, KS
Usage
7,050 hrs
7,050 hrs
Serial number
90157
90157
Loading...
ID number
#15009895
In yard
No
Features
Air Conditioner, Drum Camera, Anti Two-Block, Tadano Load Moment Indicator, 7050 hrs Crane Operation, 2013 US EPA Label, 34 ft Minimum 105 ft Maximum Boom Length, Auxiliary Hoist, Rooster Sheave, 30 ft to 50 ft Bifold Swingaway Jib, 1082 lb 45 ton Capacity Johnson 4 Sheave Hook Block, 10 ton Capacity Overhaul Ball, 36 in Triple Grouser Track Shoes, Expandable Width Tracks












Serial Number / VIN
90157
CE Mark
No CE mark found
Hour Meter / Odometer
7050 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Steps/Ladders
Exterior Lights
Operational
Safety Certification Label
There is a safety certification label with a date of 9/13/2025
Safety Certification Report
Safety Certification Report Available
Load Chart
Yes

Travel Alarm
Operational
Seat Belts
Operational
Safety Lock Out/Stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Hours of Crane Operation
7050 hrs Crane Operation















Glass
No visible damage
Seats/Armrests
Load Moment Indicator
Not operationally checked with a load., Tadano
Controls Hydraulic or Air
Load Charts
Chart book in cab
Oil Pressure
No oil pressure indicator
Warning Lights
Operational
Gauges
Operational
Hoist Brakes
Drum Rotation Indicator
Operational
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.








Engine
2013 US EPA Label
Emission Label
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Right Side
Limited Function Check
The engine started and ran.




Steering Clutches (Crane)
Steering Brakes
Drive Motors
Final Drives
Limited Function Check (Drivetrain-Crawler Crane)
The drivetrain functioned properly without a load.










Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Main Hoist
Auxiliary Hoist
Lift Cylinders
Telescopic Boom Cylinders
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.











Main Boom Pins
Main Boom Sections
Sheaves
Boom Head Section
Wear Pads
Boom Angle Indicator
Doesn't swing free
Turntable Bearing
Bottom Covers
Limited Function Check
The main crane components functioned when checked without a load.

















Overall width (outside to outside of shoes)
221 in Overall width
Track Tensioners
No visible damage
Shoe Width
36 in track shoes
Track links
Pins and bushings
Carrier Rollers
Track Rollers
Front idler wear
See photos
Sprockets
No visible issues





Jib
Main Load Block
Overhaul Ball
Fairlead
Counterweights
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Apr 10, 2026 |
| Silicon | 0 PPM |
| Tin | 0.36 PPM |
| Silver | 0 PPM |
| Aluminum | 0 PPM |
| Chromium | 0.17 PPM |
| Lead | 1.36 PPM |
| Copper | 0.25 PPM |
| Nickel | 0.14 PPM |
| Iron | 7.39 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, January 8, 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.