85 Photos
2013 Vermeer BC1800XL Tow-Behind Wood Chipper
Located
South Vienna, OH
South Vienna, OH
Usage
2,225 hrs
2,225 hrs
Serial number
1VRY131Z7D1004030
1VRY131Z7D1004030
2013 Vermeer BC1800XL Tow-Behind Wood Chipper
South Vienna, OH
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15857090
In yard
Yes
Features
41 in Feed Opening, Swivel Discharge Chute, Loading Winch, 4 Cylinder Diesel Engine, Lunette Ring Carrier Trailer, Electric Brakes
General Appearance
(19)
Serial Number / VIN
1VRY131Z7D1004030
Hour Meter / Odometer
2225 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet Metal (fiberglass) Condition
Hand Rails
Chassis
(2)
Control Station
(11)
Chipper Drive Controls
Safety Lock Out/Stop
Operational
Warning Lights
Operational
Oil Pressure
69.6 PSI
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
(15)
Emissions Status
No US EPA Label Present
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Drive System
(21)
Belt Engagement Lever and Linkage
Belt Tension Adjuster
Engine Mounts
Drive Pulleys
Chipping Wheel
Wear
Chipping Blades
Heavy wear
Feed Rollers
Heavy wear
Limited Function Check
The main components were operational when checked without a load.
Hydraulics
(5)
Pumps (Hydraulics)
Hydraulic Motors
Could not visually inspect
Valves
Hydraulic Tank
Hoses
Limited Function Check
The hydraulic system was operational.
Trailer Chassis
(12)
Trailer Brakes
Electric brakes
Limited Function Check - Brakes
The brakes were not operationally checked.
Tire Condition
Wheel Condition
Axle Condition
Springs/Hangers Condition
Torsion Axle
Tongue/ Hitch Condition
Lunette ring
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
License Plate Light Functional
Not operationally checked
Frame Rails/ Main Beams Condition
No visible damage
Landing Gear / Tongue Jack
Deck/ Floor Condition
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Oct 27, 2026 |
| Silicon | 1.07 PPM |
| Tin | 0.66 PPM |
| Silver | 0 PPM |
| Aluminum | 0.42 PPM |
| Chromium | 0.02 PPM |
| Lead | 2 PPM |
| Copper | 5.09 PPM |
| Nickel | 0.09 PPM |
| Iron | 4.19 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Transaction fees
Payment
Items must be paid in full by Thursday, November 5, 2026. Late fees (opens in a new tab) will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.